TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
|
RobP - that must be why mine opens the left then, as I am sure the spacer and plug only fit one way round when I was putting it all in!
Might just be they changed the design? Glad your sorted though 
|
 2nd May 2009 3:51 pm |
|
|
nigel207
Member Since: 26 Mar 2009
Location: Nottinghamshire
Posts: 1344
  
|
Got the spacer and also turned the socket through 180 degrees so that it opens to the left. Brilliant - it works! Thanks to you all.
|
| 27th May 2009 5:08 pm |
|
|
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
|
I am starting to think maybe mine is in the wrong way roudn now! 
|
| 27th May 2009 5:40 pm |
|
|
simoniz
Member Since: 28 Oct 2007
Location: The green green grass of home!!!!!
Posts: 3755
  
|
TP
Nope to the right is the correct way IMHO and if it works don't mess as you may regret it 
|
| 27th May 2009 7:57 pm |
|
|
Tallmilan
Member Since: 18 May 2009
Location: UpNorth
Posts: 4
 
|
| Re: 13 pin electrical towing connection |
|
RobP wrote:There is a flange on the plug that means this twisting is difficult if not impossible as it catches with the chassis. The solution seems to be buy a plug with no flange (I haven't found one yet) or else modify the chassis behind the rear bumper.
Any thoughts advice welcomed.
Rob
I removed the flange on the plug instead, easier mod than modifying the bumper ...
Did break the 7-to-13 adapter though before I realised that everything was 90 deg CW.
(First post after lurking around for two years)
|
| 27th May 2009 9:33 pm |
|
|
