nick2506
Member Since: 22 Nov 2005
Location: Chesterfield
Posts: 27
  
|
| 18" tyre and wheel combinations |
|
My disco 3 is wearing standard fitment 255/60R18 Pirelli Scorpion Zero's. I was wondering what would the effect be of fitting a set of 255/55R18 tyres with greater sidewall strength and a more off road biased tread ?
General AT2's or BF Goodrich AT's in 18" or something similar in construction would be my first choice tyres.( both in /55 sidewall hight ratio ).
The reduction in overall wheel and tyre diameter and resulting reduction in ground clearance would be my first concern.
Also, I don't know if any Disco 2 18" alloys, Mondials, triple sports etc, would physicaly fit on the hubs and have the required strength on a Disco 3.
Any info greatly welcome, 
Cheers,
Nick.
|
 11th Jan 2006 9:59 am |
|
|
Nickhearne
Member Since: 28 May 2005
Location: Ibstone Bucks
Posts: 999
 
|
This bit will be a no!
"Also, I don't know if any Disco 2 18" alloys, Mondials, triple sports etc, would physicaly fit on the hubs and have the required strength on a Disco 3. "
the D3 is heavier!
Nick D5 HSE Waitona Grey 2015
Range Rover Sport Estate 2.0 P400e Hse Dynamic Black
D4 HSE Santorini Black
Almond Arabica hide & Walnut trim Now sold
Discovery 3 TDV6 SE
Zambezi Silver Ebony leather Now sold
|
| 11th Jan 2006 10:08 am |
|
|
Non Stick Nick
Member Since: 02 Oct 2005
Location: Reading, Berkshire
Posts: 772
|
Nick,
your concerns & question mirror those of many others. I have just been through myself. Most people seem to go for the 17inch rims from the base model D3 and find there is a better choice of tyres with off road bias. I have gone for the Cooper ST which is an all terrain patter. The Cooper STT is a mud terrain pattern.
I believe this tyres cone from OZ, but are available in the u.k.
With all the electrickery that the D3 has I have the ST is fine for what I do and it showed the ultra modified boys of th AWDC a thing or 2 recently at a driving day.
Cheers
Non Stick Nick I am a hob nobber.
|
| 11th Jan 2006 10:14 am |
|
|
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10354
|
Disco 2 alloys have a smaller centre hole in the alloy, so wont go on an Disco 3 hub flange (although they do have the same bolt pattern at 5 x 120mm)
In terms of physical fit, any L322 Range Rover, or RR sport alloy will fit, and I would have thought would be OK weight wise, as isn't the RR sport the same weight as Disco3?
Alan Volvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
|
| 11th Jan 2006 10:56 am |
|
|
Nickhearne
Member Since: 28 May 2005
Location: Ibstone Bucks
Posts: 999
|
I believe the D3 is heavier than RR & RRS, we have been down this road b4 try having a search! D5 HSE Waitona Grey 2015
Range Rover Sport Estate 2.0 P400e Hse Dynamic Black
D4 HSE Santorini Black
Almond Arabica hide & Walnut trim Now sold
Discovery 3 TDV6 SE
Zambezi Silver Ebony leather Now sold
|
| 11th Jan 2006 1:30 pm |
|
|
