Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
If your putting a Range Rover ecu in and stuff then if proberly would work try and get a loom with the wiring already in place for itDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
I actually did fit this equipment to my D3 a few years ago, I was testing it for BBS, Colin sent me all the parts including the main loom, I had to make up some small looms to get it to connect up to the D3 .
I got it all working and powered on, but no matter what we tried we could not get it to calibrate to the car.
You have to do this step first as it wont go any further in to the setup without this step.
I tried for a few months on and off to get it to work and it seems its very critical where the front scanner is placed, on the D3 you cant place the radar scanner in the same place as on the RR .
In the end I removed all the ecus and looms and ended up posting it all back to BBS and I never heard anything more about it, I think the project was abandoned by BBS.
I don't think there has been anybody who has fit it to a D3 and got it working, but I maybe wrong..
Flack
13th Feb 2019 6:01 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
That’s the same as I got with my d4
Bbs abandoned it as he got a rr and fitted it to that and all worked first timeDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
13th Feb 2019 6:32 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26699
I thought DISCOJASE had it on his D4? Might be dreaming it though!
13th Feb 2019 6:34 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Late d4 2014-2015
Was An Option
bcm on pre that year wasn’t a
OptionDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
13th Feb 2019 6:58 pm
francescor75
Member Since: 07 Jul 2018
Location: Palermo
Posts: 83
this is my eco, radar a wiring
Last edited by francescor75 on 13th Feb 2019 8:26 pm. Edited 1 time in total
13th Feb 2019 8:03 pm
francescor75
Member Since: 07 Jul 2018
Location: Palermo
Posts: 83
became from a Range Rover Sport L320
Last edited by francescor75 on 13th Feb 2019 8:27 pm. Edited 1 time in total
13th Feb 2019 8:05 pm
francescor75
Member Since: 07 Jul 2018
Location: Palermo
Posts: 83
it is possible to fit in a discovery 3 ?
Last edited by francescor75 on 13th Feb 2019 8:27 pm. Edited 1 time in total
13th Feb 2019 8:07 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Gap told me that there is no calibration data in the bcm as was never a option on the d3-4 so it can not calibrate no matter what you tryDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
13th Feb 2019 8:15 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20727
BCM is the same between D3/RRS, so perhaps some fancy firmware is required...My D3 Build Thread
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Bcm is the same yea but filmware isn’t and they said that there nothing they could do to implement it and make it work hence why no one ever managed to get it to calibrate I spent a long time with them on this and that was the outcomeDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
13th Feb 2019 8:45 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Discojase deffinatly has it on his D4 .. Iv seen it working with icon on dash
It’s the only D4 with it on as far as I’m aware
Could get his car ccf file read next time he about .. might help with what settings are neededG4 Gone ...but not forgotten
13th Feb 2019 9:55 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
I got all the settings from gap and bbs there 7 in total but I gave up as could never get it to work even bbsspy couldn’t get it to work but did on a Range Rover
If you could find out wiggs as I still have the bits in my loft and would go loverlt with my lcd dashDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
13th Feb 2019 10:00 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
I think the problem is that gap / black box have never actually seen a D4 with it on ..so they can’t actually see what the settings should be
Here’s 2 pics from Jason’s car
Adaptive in use. First image is it can sense a car that it's following then the 2nd is when it can't sense anything - clear road
G4 Gone ...but not forgotten
13th Feb 2019 10:45 pm
francescor75
Member Since: 07 Jul 2018
Location: Palermo
Posts: 83
I wrote an email to Gap to find out if this calibration function exists for the D3
he replied that for the moment no, but having had this request from another user, perhaps he will add this function.
if it really will added this function I think it is possible a retrofit on D3
does anyone know how to connect the wires from the ECU to the car?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
