Member Since: 19 Apr 2012
Location: Melbourne, Victoria
Posts: 85
Advice pls. P0579 fault and +/- not working for IID tool
Hi all,
I've read the other threads about the P0579-00 fault. I'm located inner city and don't really have much opportunity to see if the speed control actually works or not.
However, the +/- buttons don't work for my IID tool.
Fortunately I also have an Autel diagnostic tool and it's reporting P0579-00 "Speed control multi-function input A - circuit range/performance". It's flagged as "intermittent"
For some time now, when driving at night I have also noticed the illumination of the speed control switch flickering.
EDIT: I am also getting "P0576-16 Speed control input - circuit low. Intermittent."
1. Is this likely to be a wiring loom issue?
2. And if so how do I get at it?
3. Is it feasible to repair the loom in situ?
.2007 Land Rover LR3 4.0L V6
Other current other cars
2022 BMW X3 xDrive 30i
2000 Mercedes ML430 (enjoying the challenge of keeping it going!)
1973 Bristol 411 S5
If you are interested in Bristols (the cars), click on my WWW button below...
5th Mar 2019 12:50 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
likely to be the clock spring, flexi that goes between the steering wheel and car
5th Mar 2019 1:33 pm
nivekau
Member Since: 19 Apr 2012
Location: Melbourne, Victoria
Posts: 85
Thanks Pete K.
Can't believe the price of those things!2007 Land Rover LR3 4.0L V6
Other current other cars
2022 BMW X3 xDrive 30i
2000 Mercedes ML430 (enjoying the challenge of keeping it going!)
1973 Bristol 411 S5
If you are interested in Bristols (the cars), click on my WWW button below...
6th Mar 2019 5:28 am
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Not necessarily the clock spring.
My own steering wheel also had flashing lights on the buttons and this was entirely down to the little loom under the airbag. Make yourself an airbag removal tool and have a look. The cables tend to break at the crimped joints so have a good check to make sure the conductor isn't broken.
I cannot believe it's so busy where you are you cannot get up to 30mph to check the cruise buttons are working but if that really is true, try at weekend or look for an open stretch of road.
Looks like this when you have a broken wire. From memory, white was for lighting the buttons and brown ( extended with red in the pic ) was cruise function.
Member Since: 19 Apr 2012
Location: Melbourne, Victoria
Posts: 85
Narpy wrote:
Not necessarily the clock spring. Wink
Aggh! Only just saw this post and I ordered a clock spring yesterday! Oh well, I guess I can flog it on ebay if I don't need it.
And yeah, you're right, I guess I can test the cruise control - I just don't get to drive that car much nowadays because my wife and my son monopolise it!
Thanks for the advice - I will comandeer the car at the weekend and have a look! I'll need to make an airbag removal tool anyway.2007 Land Rover LR3 4.0L V6
Other current other cars
2022 BMW X3 xDrive 30i
2000 Mercedes ML430 (enjoying the challenge of keeping it going!)
1973 Bristol 411 S5
If you are interested in Bristols (the cars), click on my WWW button below...
13th Mar 2019 2:19 am
nivekau
Member Since: 19 Apr 2012
Location: Melbourne, Victoria
Posts: 85
Sorry about the late follow up.
It turned out one of the wires in the loom inside the steering wheel had broken off at the connector pin. I popped the connector pin out, soldered the wire back onto it and everything is working now.
See pic attached.
Thanklfully Clocksprings Australia accepted a return of the clock spring and gave me a full refund, less their original postage cost.
.
2007 Land Rover LR3 4.0L V6
Other current other cars
2022 BMW X3 xDrive 30i
2000 Mercedes ML430 (enjoying the challenge of keeping it going!)
1973 Bristol 411 S5
If you are interested in Bristols (the cars), click on my WWW button below...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum