jimmygs3
Member Since: 26 Jun 2005
Posts: 11
|
| HAS ANYONE FITTED AN AUX LEAD TO BACK OF STANDARD STEREO. |
|
HI. NEW TO FORUM........GOT THE COVER OFF AND CAN GET RADIO OUT AND CAN SEE PINS. DOES ANYONE SELL AN ADAPTO/INTERFACE OR DO YOU HAVE TO SOLDER YOURSELF. IF SO...N THE PHONO LEADS..WHICH PART OF LEAD IS GROUND....PLEASE HELP ME IF POSSIBLE. CHEERS. JAMES. UK
|
 26th Jun 2005 8:16 pm |
|
|
Roddy
Member Since: 18 Apr 2005
Location: Aberdeen
Posts: 132
  
|
I have soldered the connections to the rear Aux socket. Red and blue are right and left channel. Connect the screen or ground to pin 6 (top row) opposite end to the red and blue. I cut the wires leaving tails, and soldered to them. The wires don't go anywhere on mine. Sound is perfect. I then run under centre consul to the rear of same where I have fitted the power socket. I then use the Belkin power plug with the built in line out mini jack.
Hope this helps.
|
| 27th Jun 2005 5:42 am |
|
|
jimmygs3
Member Since: 26 Jun 2005
Posts: 11
|
fitted with a bit of time and solder....sounds sweet. have the sony with line out function so no amp needed. so eady to do. cheers james.
|
| 30th Jun 2005 6:09 pm |
|
|
Roddy
Member Since: 18 Apr 2005
Location: Aberdeen
Posts: 132
|
Glad you got it fitted. Still can't understand why they could not give us a proper input on the base radio!!!!
|
| 30th Jun 2005 10:16 pm |
|
|
