good morning.
my automatic windscreen wipers have decided to default to operating every 2 seconds when turned on and the auto headlights permanently stay on.
the windscreen was replaced over Christmas with a genuine landrover screen.
could this be a loose connection from when they replaced the screen, or does the system need a hard reset or is the sensor knackered.
if possibility of a loose wire can anybody point me in the direction of the connection so I can check it.
I can see the sensors from outside and they all look how they should with no bubbles under the surface. I have also checked the connection onto the sensor and it is fine. so looks like the sensor is knackered.
thanks for the help
15th Mar 2020 7:52 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8231
Pour water over the screen where the sensor is and see what the wipers do, cover the sensor up and see what the lamps do, Disconnect the sensor and see what happens, if they are still the same it’s the sensor.It can when others can't,
It will when others won't,
It goes where others don't.
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
That’s a good start then.
Do you have any warnings on the dash?
There’s a connector which may not be seated correctly. Could be worth popping off the plastic trim around the mirror/windscreen bracket and checking its correctly engaged.
Do you have auto dip? If so, does that work?
Does the chromatic mirror work?012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
connector on the sensor is seated correctly. don't know about the connector at the other end I assume it is behind the interior light. no auto dip and I must admit I haven't noticed if the mirror is working correctly.
So I have now put a new sensor on and still the same problem it is not working. all seated correctly. I do have an intermittent error code regarding connection to auto sensor.
where do I find the other end of the connector from the sensor. I looked behind the light and could not find it
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
