Would this be able to reprogammed to work with the BAS software?
17th Jan 2013 11:17 pm
Leesbay
Member Since: 20 Dec 2011
Location: rainford
Posts: 1581
My understanding is that the box is just a storage and uploading OBD interface. Once the correct linking software is uploaded to suit the vehicle the ecu map can be downloaded onto the box, transferred onto your pc and emailed to a tuning company such as alientech. I cannot confirm if pete bell BAS would offer this service, so maybe you should ask him first. Once the map is tuned it is emailed back and you uload it through the obd port from the powergate box, you can switch between mormal and tuned as you see fit. These boxes can only be used on one car at a time and the car must be reset to standard before the box can be used for another car.
I believe all the boxes are principally the same, the magic lies in the maps, which i understand from the many comments on the forum the BAS maps are brilliant and very highly rated
I have used the same box many times on many diesel cars with tuned maps from alientech. Each new map is £80.
Alientech are on ebay, they offer a powergate box, a power map and economy map for £279, if you haggle you may get it cheaper.
If i was starting again, and had the dosh, i would go for the BAS box and file because of the support and the fact there has been so many recommendations of praise....................................................................................................
If my wife ever sells my stuff for what she thinks I paid for them, you lot are gonna get some bargains!
17th Jan 2013 11:35 pm
Kev91
Member Since: 08 Oct 2012
Location: Erskine Bridge
Posts: 430
Thanks very much for all that, I'll keep an eye on that listing and try and get on the blower to Pete from BAS in the next few days.
18th Jan 2013 3:04 am
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
Just seen this post and thjought i best answer.
We cant support non branded BAS style boxes as they all have different firmware inside. the BAS box is dedicated to us and so is the firmware so our tuning can only work with our boxes.
Though the boxes seen arround look the same, it only the main pcb that is the same
pete
18th Jan 2013 2:54 pm
Martin.j
Member Since: 10 Nov 2012
Location: Isle of Wight
Posts: 46
45mins to go and still only upto £112 + pp.
22nd Jan 2013 6:54 pm
den2013
Member Since: 03 Jan 2013
Location: Alland
Posts: 622
I am appealing to the most knowledgeable of people (as everyone is that's on this site) for a little advice on a small matter i have in mind.
Have been thinking of getting one of Pete's (BAS) boxes as i like seeing everyones praise for them, and i do not want to get a useless cheap box, but i do have a question, want to use it on MY08 D3, but in a few years time will i be able to use it on a D4(more than likely new), not the same map as for the D3, a new map for the D4 would be required as i understand, but would like to know if the box would still be okay to use.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
22nd Jan 2013 8:29 pm
StephenO
Member Since: 15 Feb 2010
Location: Scotland
Posts: 1651
2016 RR Sport Autobiography
2005 D3 Zambezi Silver
1995 Defender 90 300Tdi Coniston Green
1968 Series 2a SWB Bronze Green
22nd Jan 2013 8:47 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
den2013 wrote:
I am appealing to the most knowledgeable of people (as everyone is that's on this site) for a little advice on a small matter i have in mind.
Have been thinking of getting one of Pete's (BAS) boxes as i like seeing everyones praise for them, and i do not want to get a useless cheap box, but i do have a question, want to use it on MY08 D3, but in a few years time will i be able to use it on a D4(more than likely new), not the same map as for the D3, a new map for the D4 would be required as i understand, but would like to know if the box would still be okay to use.
Thanks in advance for any info.
The BAS remap interface does not support the D4, the D4 ecu has a different setup totally so cant be added to the existing D3 BAS module.
pete
Last edited by bellautos on 22nd Jan 2013 9:08 pm. Edited 2 times in total
22nd Jan 2013 9:03 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
If anyone here got the BAS tool from ebay can you please let me know the sellers name and email addres so i can clear my records.
Member Since: 15 Feb 2010
Location: Scotland
Posts: 1651
Pete,
You have a PM 2016 RR Sport Autobiography
2005 D3 Zambezi Silver
1995 Defender 90 300Tdi Coniston Green
1968 Series 2a SWB Bronze Green
22nd Jan 2013 9:55 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
reply sent
22nd Jan 2013 10:01 pm
den2013
Member Since: 03 Jan 2013
Location: Alland
Posts: 622
The BAS remap interface does not support the D4, the D4 ecu has a different setup totally so cant be added to the existing D3 BAS module.
pete
Many thanks for the reply Pete.
I take it from the other posts below mine if i was to find a second hand one i would be able to use it on my D3 after being sent to you for new software, after the old owners info being taken out.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
for a little advice on a small matter i have in mind.
useless cheap box, but i do have a question, want to use it on MY08 D3, but in a few years time will i be able to use it on a D4(more than likely new), not the same map as for the D3, a new map for the D4 would be required as i understand, but would like to know if the box would still be okay to use.
That went cheap, did someone get a bargin?
2005 D3 Zambezi Silver
