jann1ck
Member Since: 08 May 2017
Location: Cardiff
Posts: 9
  
|
Morning all need some help, firstly I have a 61 plate D4 ambulance. It started life as a commercial. I need to change the leisure battery but there are no marking on the existing one, two bolt down terminals on the top and thats it. for those in the know I have a Genysis system fitted. So I need to change the battery, so any advice would be welcome.
Secondly i cant get my head around can bus and LED bulbs !! How can I tell if I have canbus or not ?? Can I just buy LED's and fit them ?? TIA
|
 9th Jul 2020 6:41 am |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
  
|
Battery easy enough, get a bulb and a couple lengths of wire, attach one wire to one of the battery terminals, and the other wire to a chassis ground, if bulb lights you are on the pos terminal, if not you are on the neg terminal or the bulb/wire is no good, so check check and check again before commiting.
Which bulbs are you looking at changing?
|
| 9th Jul 2020 5:10 pm |
|
|
jann1ck
Member Since: 08 May 2017
Location: Cardiff
Posts: 9
|
Hi thanks, I didn't explain enough. I know which terminal is which but not sure which NEW battery to replace it with. There are no marking so dont know amps or spec off battery. All I know its a leisure battery.
With regards to bulbs I want to slowly change all of them. (I have blue lights fitted but not touching them) its just the standard vehicle lighting.
|
| 9th Jul 2020 9:50 pm |
|
|
