dazhoop
Member Since: 24 Oct 2022
Location: Surrey
Posts: 8
  
|
| Blind Spot and Rear Traffic detection not working |
|
Practically 0 mechanic skills here, but thought I could at least change a mirror glass on my 2014 Disco 4.
I have Blind Spot and Rear traffic detection, so whilst not buying the £183 piece from LR, I did buy the appropriate equivalent replacement part. Upon connecting the glass I get BLIS and rear traffic deactivated warnings when putting in reverse / drive.
I then exchanged the circuit board off the back of the old glass onto the back of the new piece (which was quite clever thinking for me, I thought!), but still getting these deactivated warnings.
Is there some sort of reset needed, and if so how?
Help and advice would be gratefully received, please!
|
 26th May 2023 3:46 pm |
|
|
dazhoop
Member Since: 24 Oct 2022
Location: Surrey
Posts: 8
|
FYI, somebody on one of the FB groups I subscribe suggested that when a fault is detected, sometimes the fault indication stays there until it is cleared in the fault list even after repair.
Going to try and get ahold of a GAP IID and report back if and when successful
|
| 28th May 2023 4:34 pm |
|
|
