They're fine for keping the hole clear but don't stop the threads from rusting Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
They're fine for keeping the hole clear but don't stop the threads from rusting Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
4th Nov 2024 2:04 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
rowlejohn wrote:
They're fine for keping the hole clear but don't stop the threads from rusting
Indeed and when I had all new brake calipers, pads and discs etc ensured that I bought new bleed nipples and applied some ceramic grease onto the threads which hopefully over time will allow them to come out easily and not snap off
4th Nov 2024 3:14 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 333
some brilliant comments here
thanks for the link stuart. in my basket had a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
4th Nov 2024 6:51 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Ur so very welcome , indeed always a team effort
Of course not wishing to try and teach u how to suck eggs but the brake fluid needs to be dot 4 class 6
I used this , personally got 2 x litres to ensure I had plenty when changing the old fluid
Also made up a bottle to accept the brake fluid , drilled a small hole in the cap otherwise fluid would be able to enter the bottle when I use the pressure system , plus a syringe to remove old fluid within the master cylinder
Along with that I got some spanner’s that have a built in non return valve but in reality only needed if a vacuum type of bleed system is used
Like the sealey brake pressure bleeder as it has a metal brake master cylinder cap
Hope that’s also useful to u
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
4th Nov 2024 7:07 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
As a side note plse check all ur brake pipes as I need to replace all of mine front to back as the steel pipe is rusty
Wished to share the bits I’ve found invaluable in case u need to replace any of ur brake pipes , already replaced all the brake hoses including the short ridged rear brake pipe
Hope that’s also useful to u
Click image to enlarge
Click image to enlarge
Click image to enlarge
4th Nov 2024 7:14 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 333
gstuart wrote:
Plus 1 ref the gap iid
Or Personally use one of these
Click image to enlarge
Just ordered this. Do I need anything else to go with it ?
Thanks stuarthad a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
4th Nov 2024 7:15 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Things I can think of are
SL6 brake fluid, bottle to bleed the fluid into and a syringe to remove the old fluid within the master cylinder , oh and some tube to go onto the bleed nipples , personally got clear tubing so easier to see the air bubbles coming out
Enclosed the link of where I got the bottle and clear tube from and fitted a pushfit fitting , short piece of pipe on top to accept the clear tubing and simply disguarded the other bit seeing I didnt need it
Handy with the bottle having an isolating valve so that fluid isn’t spilled everywhere , but just drilled a small hole in the cap to allow fluid to enter the bottle
Last edited by gstuart on 5th Nov 2024 12:07 pm. Edited 2 times in total
4th Nov 2024 7:19 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 333
had a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
4th Nov 2024 10:26 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 333
pressure bleeder came. very nice.
also discharge pipe with a nice 90* on the endhad a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
5th Nov 2024 7:30 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 333
Is there a correct sequence to bleed the brakes on a disco 4.
I.e. rear left first, rear right, front left then front right ?
Thanks
Mikehad a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
5th Nov 2024 9:18 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Hi mate
Indeed as u specify I’m also on the understanding that’s the correct sequence
Hope all goes well
7th Nov 2024 5:23 am
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 333
All done. Pressure bleed kit is great. Not sure how firm the pedal should be
Mikehad a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
7th Nov 2024 10:40 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
That’s Awesome Mike and so pleased the pressure kit worked well
Regarding the brake pedal I found it was quite firm, wasn’t spongy at all and brakes started to come on after a few inches
Found one of the good tests is to see what the brake pedal is like the next day and if u have to pump it up again would need to re bleed them if it’s spongy
Hope that’s useful to u and of course more knowledgeable members will be able to advise u better
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
