Member Since: 07 Jan 2012
Location: Peterborough
Posts: 40
Breather pipe connection
Hi all, I'm on holiday in France and got the dreaded restricted performance light come on. Sounds like rushing air under load, local garage diagnosed leaking air inlet manifold. I've been having a look and noticed a small plastic pipe has come off a rubber tee piece. First question is, I assume it has come off the rubber t-peice? Second, is this likely to be my problem or just a separate one? Also it looks like there other side of the t-piece it's also missing a pipe, though I can't see one anywhere.
28th Jul 2020 6:00 pm
captaindarling13
Member Since: 07 Jan 2012
Location: Peterborough
Posts: 40
28th Jul 2020 8:49 pm
DiscoJeffster
Member Since: 27 Feb 2016
Location: Perth
Posts: 204
These always break/fail through heat but are not enough to cause the fault. It will be a split manifold. I had this split on mine for a while before I realised. Part number is LR013531
29th Jul 2020 3:38 pm
Steve RR
Member Since: 16 Jul 2010
Location: Ayrshire
Posts: 60
Well mine have gone brittle too and just about to replace them, however I have noticed that the spigot that sticks up and goes into the T piece has snapped off, so what is that plastic housing? Cheap and easy to swap, or removable to repair maybe?
Not at home just now to dig deeper so just wondering if anyone knows?
Thank you.2010 XS with lots of upgrades
2011 Commercial with every option possible!Fuji white(gone and missed 😥)
2007 TDV8 FFRR
4.6 P38 Autobiography
300Tdi county 110
Too many late Classic RR to count
Bowler Tomcat
20th Aug 2021 9:55 am
DiscoJeffster
Member Since: 27 Feb 2016
Location: Perth
Posts: 204
It is engine model dependent, but for the 3.0L it's this part
Member Since: 28 Dec 2018
Location: Cradley Heath
Posts: 382
You can blank those off. New manifolds have the fitting for the rubber elbow, but is not drilled through, so not used. The little nipple on the breather box just needs to be capped.
If you really want to keep the cross head breather, you can use copper brake pipe as a substitute.Joe
27th Aug 2021 11:53 am
Shamrock
Member Since: 16 Jun 2022
Location: South Kerry
Posts: 113
I just wanted to notice that copper pipe CANT be used for brakes
Only copper plated steel or CuNiFe !
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
