Member Since: 07 Sep 2011
Location: Midlands
Posts: 87
checking oil level
I've tried reading off the oil level from the service display on my MY12, but I am getting a 'not currently available' message, despite sitting there for 5 mins or more. Am I doing something wrong?
5th Jan 2012 1:05 pm
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
5 mins is not long enough - needs to be at least 15 on mine - I usually leave a lot longer than that
5th Jan 2012 1:20 pm
Blue62
Member Since: 07 Sep 2011
Location: Midlands
Posts: 87
Are you able to go off and do something else in the meantime, that seems ridiculous. I take it there's no dipstick?
5th Jan 2012 4:08 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3654
on mine, I lock the car up, then come back about 15 minute later and the oil level is displayed, however come back over an hour later and get the message 'not available'
5th Jan 2012 4:14 pm
Ted Newman
Member Since: 09 Oct 2010
Location: SE London
Posts: 840
I always do mine first thing in the day before starting the engine - never have a problem.LR Discovery 4 XS pulling an Airstream 532 Caravan also own (since new) a 1996 MGF
5th Jan 2012 4:15 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73085
Blue62 wrote:
I take it there's no dipstick?
Only the dipstick that decided peeps can rely on LR's electrickery. Mind you my 520d had no dipstick but the oil is checked when the engine is running so no wait.
5th Jan 2012 4:39 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
The handbook says:-
Prior to checking the oil level ensure that:
The vehicle is on level ground.
The engine oil has reached working temperature (oil is hot).
The engine has been switched off for 10 minutes, as the system will not give an accurate reading until the oil level has stabilised.Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
5th Jan 2012 4:58 pm
Blue62
Member Since: 07 Sep 2011
Location: Midlands
Posts: 87
Hairy Dan wrote:
The handbook says:-
Prior to checking the oil level ensure that:
The vehicle is on level ground.
The engine oil has reached working temperature (oil is hot).
The engine has been switched off for 10 minutes, as the system will not give an accurate reading until the oil level has stabilised.
Thanks Hairy Dan, I missed the 10 minute thing in the handbook, didn't realise that I could go off and do something else in the meantime.
5th Jan 2012 8:45 pm
cherokee
Member Since: 03 Jul 2007
Location: preston
Posts: 562
I would be interested to know what readings people are getting, over the first 2000mls.I was told
by the dealer that it is normal for oil to be used over the first few thousand miles, and they said
that if it reads OK, then it is ok, I would feel more confident with a Dip Stick maybe i'm to Old, Hey Ho Always walk behind a Shooter and
In front of a Sh*ter
5th Jan 2012 9:33 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3654
after about 2.5k my D4 was registering half full, called in at my dealers who topped it up without charging me 8)
5th Jan 2012 10:28 pm
cherokee
Member Since: 03 Jul 2007
Location: preston
Posts: 562
Cheers WOODY179, mines done 1700ish and is reading 3/4 so is about right thanks.Always walk behind a Shooter and
In front of a Sh*ter
5th Jan 2012 10:34 pm
character
Member Since: 31 Dec 2007
Location: wiltshire
Posts: 5781
so the idea of running him up to full temp and then leaving him for 10 mins before checking the oil level - would that apply to D3's coz my dipstick is the bain of my life ie its one of those nobbly ones which are a ugger to read when mine's cold
Mine started out as full but dropped two notches in the first 400 miles and hasn't moved since, well not so far. Now at 1100 odd miles. It just had an inspection service and the dealer did not top it up, saying they prefered to leave it at that height to avoid overfull warnings.
5th Jan 2012 10:55 pm
Reginald Molehusband
Member Since: 17 Nov 2009
Location: West Calder
Posts: 632
LR's electronic oil measuring instructions are prejudiced against what is probably their avarage owner, ie those of us who, when we finally do remember to check the oil and park on level ground with that intention, lock up the car and start the 10 minute wait; then instantly forget all about it until half a day later..
So far I have had my D4 2 years and completed the whole procedure about 3 times only.
I've been lucky the level never moves off 3/4 and I have a shelf full of 1 litre bottles of oil provided by the stealer at each service and never needed by the D4 or preceding RRS. 2016 D4 Landmark SDV6 (Euro6), Zanzibar (late run D4)
2009 D4 HSE TDV6, Bali blue (first run D4)
2007 RRS TDV8 HSE, some blue
.
Member Since: 07 Sep 2011
Location: Midlands
Posts: 87
So tonight I switched off the engine and turned on the ignition, set the system to measure oil level and left the car for 10 mins, when I came back the screen was blank. I'm no newbie to this as I've had a couple of cars with electric dipsticks but not struggled like this. Now worrying me because my cars covered 1500 miles and want to know the level. Is it me?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Mind you my 520d had no dipstick but the oil is checked when the engine is running so no wait.
