As I'm interested in an Allisport Fast Road Intercooler I thought asking here if in meantime there is an interest in a Group Buy for these I could join?
Regards
Charles
6th Jan 2014 6:26 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
I suspect there will not be enough interest to get 5 people, to run this GB...
Mainly because a larger intercooler can be purchased for little over £120
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
Well thats quite a bit bigger ! Is there enough room to get it in ?
Mikey how does the quality of this compare to the allisport one .You're not afraid of the dark are you ?
6th Jan 2014 8:16 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
JUST enough room. Quite literally a few mm either side to spare
Quality seems to be good. It feels more substantial than the OEM, and Allisport one.
The core itself is larger again than the A/S cooler.
As for quality, this was an Allisport cooler, I fitted to an RRS after 3 weeks...
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
6th Jan 2014 8:41 pm
Cellerdweller
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
Well the man says a couple of mm to spare so i think we can safely asume it fits .
I think i need one of these You're not afraid of the dark are you ?
6th Jan 2014 8:56 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
I am also going through this at the moment - here's mine as part of the trial fit:
Click image to enlarge
Click image to enlarge
It's tough but you need to get the right one - some are marginally too big! Mounting high in the "off-road" position is even tighter/harder (note the Off-road Allisport is smaller than the fast-road version).
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
6th Jan 2014 9:03 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
A RS500 one I have had for a while, I am going for a rear shroud to ensure the airflow is maintained into the bottom of the fan cowl, brackets will be on to the cross members for me - I have something else going on to the chassis rails....
IC is away being TIG welded (hopefully) and connectors and reducers all on order as well.
6th Jan 2014 9:06 pm
Cellerdweller
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
These are lookin good . From what has been said caution is required when ordering
As the size varies .could one of you gents point me in the right direction so i can order the right one. You're not afraid of the dark are you ?
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
6th Jan 2014 9:38 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
That core depth is easy to fit, mine is 69mm thick.........
6th Jan 2014 9:41 pm
Cellerdweller
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
Thanks beanie
This will deff have to be delivered and fitted at work i will be spare room man if swmbo finds out You're not afraid of the dark are you ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
