Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
cubby doesn't work anymore
My cubby doesn't cool as well as it did.
Fan is running, so I think it's my Peltier.
Does anyone know were I can buy a new one, doesn't have to be a original Land Rover.
Thanks
Erik
26th May 2013 3:04 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Find out which one it is and there are loads on EbayCheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
26th May 2013 4:01 pm
Pinin01
Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
Aren't they all the same for a D3?
26th May 2013 4:41 pm
Pinin01
Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
Never used Ebay before, but for everthing threre has to be a first time
26th May 2013 5:01 pm
Pinin01
Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
O.k.
I found out it's a TEC1 12704, found one (actualy several) on Ebay and ordered it..... now we wait.
27th May 2013 4:39 pm
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1284
Can you please post back when it's all working, as I have the same issue and need to know which Peltier to buy.
How did you find out whether the "TEC1 12704" was the correct one?
Thanks
John
27th May 2013 5:06 pm
Pinin01
Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
No problemo, I'll give a feedback as soon as I've mounted the new peltier.
Just hope this is the problem
I dismanteled the cubby, it's about 10 minutes work.
The type of pertier-element is stamped on it.
27th May 2013 5:29 pm
Pinin01
Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
The old peltier had printed TEC1 12704 on it, so I ordered the same one for about 6 euro in Hongkong. I ordered it about 2 weeks ago and received it yesterday by mail.
First you pull of the gearknob. You'll need some force, so make sure you don't hit yourself in the face.
Take of the panel with terrain-response, front first attached with two clips and remove the two connectors
Take of the upper floor panel. It is attached with two screws, one at the handbrake, the other underneath the rubber insert and plastic cap on the other side. The panel itself is attached with 8 clips. Pull it out , front first. Make sure the connector of the handbrake is taken off.
Take off the cover of the coolbox by unscrewing it left and right, take off the chrome caps.
Unscrew the two screws in front of the box and loosen the connector. Now you can take out the coolbox.
Once you got it out unscrew the fan (4 screws) and take off the alu-coolingblock (two screws). The peltier is placed underneath this block. Replace the peltier, making sure the cooling-side is towards the coolingbox. It has a hot and cold side!
Now place all the part in reverse order back. And you'll can enjoy a cold one at the end off your trip.
There are several PDF to be found one this site to assist you, good luck!
[/img]
16th Jun 2013 9:40 am
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1284
Excellent. I'm going to have a go at fixing mine now.
Thanks
John
16th Jun 2013 12:54 pm
Pinin01
Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
John P wrote:
Excellent. I'm going to have a go at fixing mine now.
Thanks
John
It's no rocket science. If you got any questions just PM me.
O, and take care: The peltier-element is covered in white thermo-grease. You don’t want to smear that all over the tablecloth without getting in trouble with the other half.
16th Jun 2013 1:37 pm
parrafin23
Member Since: 04 Dec 2011
Location: Buskeud
Posts: 681
is that the 60w you used?
For the 60w version:
Size: 40mm x 40mm x 3.8mm
Imax (A) : 4.3-4.6A
For 91.2w version:
Size:40 X 40 X 3.4 mm
Imax:: 6 Amps
For 154w version:
Size:40mm x 40mm x 3.4mm
I max (A): 10A
allmost the same size for all of them..
Anyone tried to use one of these to replace the original?
P.
16th Jun 2013 3:18 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Excellent write up Pinin01 Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
16th Jun 2013 4:40 pm
Pinin01
Member Since: 20 Feb 2013
Location: Brabant
Posts: 67
Hairy Dan wrote:
Excellent write up Pinin01
Thanks Dan, just doing my bit
I mounted the 60W version. I don't know what more Watt will do, but this one is getting that cold it's allmost producing ice!
16th Jun 2013 5:11 pm
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1284
Just finished fixing mine. I can't believe how cold it gets.
Should have done this ages ago. Thanks for the right up, as it was spot on.
Cheers
John
3rd Jul 2013 8:31 pm
Captain Crosscheck
Member Since: 03 Sep 2021
Location: Oslo
Posts: 340
Done mine this evening. No clips lost, only two plastic latches broken, that's a success in my book.
Only thing is, eBay sent me a Peltier element that was 30x30 mm, not 40x40 as it should have been. (Deffo not me that didn't read all the specs!)
Still cools though, but I might replace it if it struggles come summertime.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
