Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
D3 4x4 upgrade
Hi i updated my D3 for the 4x4 screen upgrade with my Gap tool which works great.Sometimes when i switch to 4x4 info i can get the compass to show on the right and it will stay on yet other times it comes up briefly then i get a message to say it is not possible to display compass and the screen to the right goes grey and displays nothing can you tell me if i have done anything wrong as the compass works fine in off road mode
CheersDiscovery 3 se gone
Range rover sport supercharged here:)
12th Dec 2014 1:50 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
compass only works on that screen when in off road nav mode. Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
12th Dec 2014 1:54 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
Thanks must have been in off road mode on way home as it stayed on all the way Discovery 3 se gone
Range rover sport supercharged here:)
12th Dec 2014 1:56 pm
Jamest
Member Since: 12 May 2013
Location: Wales
Posts: 125
Hello Geoffsnook
Did you do the 4x4 screen with the standard gap iid tool? I think that a diagnostic tool might be my next purchase. Just trying to work out which one to go for! Lots to read on here!
Regards, James
28th Dec 2014 9:10 am
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
Hi
yes i did update with gap iid tool it is really easy to use does all i would want had a hawkeye previously but that was not a patch on this bit of kit but you will need to decide what you want Discovery 3 se gone
Range rover sport supercharged here:)
28th Dec 2014 3:43 pm
Jamest
Member Since: 12 May 2013
Location: Wales
Posts: 125
Thanks for the reply. Nice to hear recommendations. My rear pdc and the fbh are both not working so an iid tool might well be the next purchase. James
28th Dec 2014 7:01 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
Depends will tell you which sensors are not working but as for the fbh if you have the i icon in the menu on the dashboard it means that the system has been updated with a software update so you can test it but thats about all Discovery 3 se gone
Range rover sport supercharged here:)
28th Dec 2014 7:06 pm
briwr250
Member Since: 22 Feb 2015
Location: Llandegfedd
Posts: 10
Hi fellas
I am near Newport in South Wales have been reading your conversation. Can you help with an upgrade to a 4x4 info screen with the clock on the dash display on both a 55 reg and an 06 reg vehicles...many thanks
11th Mar 2015 7:58 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
Hi briwr250 i cant do it as my tool is locked to my car i can read and clear faults but cant upgrade without paying for another licence but i believe a few guys will becamping up at chepstow this weekend who would be able to do it for you Discovery 3 se gone
Range rover sport supercharged here:)
11th Mar 2015 8:44 pm
briwr250
Member Since: 22 Feb 2015
Location: Llandegfedd
Posts: 10
Ok thankyou Jeff
Working all weekend unfortunatly so i cant get to Chepstow. Will keep my eyes peeled on here to try to get it sorted.
12th Mar 2015 12:02 am
briwr250
Member Since: 22 Feb 2015
Location: Llandegfedd
Posts: 10
Hi again Jeff.
I'm still looking to get this 4x4 info on my screen. Is there anything happening on the bank holiday coming as i'm off work. Would like to catch up with a few of you guys at some point to feed my brain as to what you can actually do and get out of a d3.
Cheers
Brian
14th May 2015 9:14 pm
Chris Hagain
Member Since: 14 Mar 2020
Location: Halifax
Posts: 173
I currently have the IID tool, but fairly new, and in experienced in its use.
Please can someone advise where the 4x4 screen update is located
ThanksFlat Dog Roof Rack & Prospeed Ladder
Rear mounted spare wheel carrier
Altox remote FBH
High level boot storage
Dirt Monkey Rock /Tree Sliders
Shire's compressor guard
D4 Heated steering wheel
Solar panel charging system
22nd Dec 2020 10:58 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
You need to go to ccf's and set the display screen to high spec.
I would recomend that before you do anything you download the guide from the Gap website it tells you what to do and also what to do if it goes wrong.
I would also save your current settings befire changing anything.
When you make changes some things can take a very long time so you need to make sure you have an alternative power supply to stop the battery going flat.
Setting up the 4x4 screen is a good one to start with as it takes seconds, be warned the first time you change things it can be quite scary as all the electronics will suddenly go dead for what seems like ages. its important that you dont do anything just leave it and it will suddenly come back to life, if you look on the app you will see a count down that will tell you when it will be finished.
23rd Dec 2020 6:32 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
Bodsy wrote:
compass only works on that screen when in off road nav mode.
You learn something every day! In 14 years of the same D3 ownership I never saw the compass, always greyed out, now I know why. It can when others can't,
It will when others won't,
It goes where others don't.
23rd Dec 2020 9:40 am
Pete199
Member Since: 21 Feb 2016
Location: Preston, Lancashire
Posts: 187
If you go to off road navigation screen then back to 4x4 sceeen you’ll get the compass there
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
