Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D3)

D4 Front Bumper facelift
Post Reply  Down to end
Page 1 of 2 12>
Mews
 


Member Since: 23 Feb 2016
Location: North East
Posts: 136

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3
D4 Front Bumper facelift

I have a 2005 TDV6 Discovery 3 SE, it has front fogs and headlamp wash but no front parking sensors (only rear ones). My question is that if I was to do a D4 front facelift upgrade can I install and use (with minimal fuss) the front bumper including parking sensors from a second hand Discovery 4 front bumper ? Or would wiring the front parking sensors up be a big job?

Thanks
  
Post #164674027th Apr 2016 10:54 am
View user's profile Send private message View poster's gallery Reply with quote
WillyEckerslike
 


Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967

2007 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

Remove your right hand headlamp. If you have an unused connector there, next to the fog lamps one, it's as simple as buying the D4 sensor loom, plugging it in, then getting your local friendly IIDTOOL user to tell the car that they're there.

If that connector isn't there, it's very involved.
  
Post #164674327th Apr 2016 11:00 am
View user's profile Send private message View poster's gallery Reply with quote
Narpy
 


Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830

2005 Discovery 3 TDV6 S Manual Cairns BlueDiscovery 3

You're looking for this:
 Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here. 
 
Post #164675127th Apr 2016 11:20 am
View user's profile Send private message View poster's gallery Reply with quote
WillyEckerslike
 


Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967

2007 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

I knew someone would have a photo. Laughing

There's a good chance the connector will be there, given that you have the rear sensors, but there has been a fair amount of variation in the looms to say for sure.

From your other thread, if you get a D4 front bumper with the fogs, there is a D4 loom which is part number LR015495 I think, which will connect both fogs and sensors.
  
Post #164675527th Apr 2016 11:25 am
View user's profile Send private message View poster's gallery Reply with quote
Mews
 


Member Since: 23 Feb 2016
Location: North East
Posts: 136

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3
D4 Front Bumper facelift

Great thanks guys! Thumbs Up
  
Post #164676127th Apr 2016 11:35 am
View user's profile Send private message View poster's gallery Reply with quote
Mews
 


Member Since: 23 Feb 2016
Location: North East
Posts: 136

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Thumbs Up

  
Post #164677427th Apr 2016 11:56 am
View user's profile Send private message View poster's gallery Reply with quote
WillyEckerslike
 


Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967

2007 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

Looks like you're good to go mews
  
Post #164677827th Apr 2016 12:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Mews
 


Member Since: 23 Feb 2016
Location: North East
Posts: 136

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

I got my Discovery 4 front bumper all painted and re-fitted the D4 parking sensors and D4 sensor loom, the D4 sensor loom also includes the connectors for the front fog lights too.

My question is: the D4 loom has a single connector socket which connects to the car and this is for both the front fogs and parking sensors, but on my D3 I have 2 connectors available (1 is for front fogs and 1 is for front parking sensors).

Anyone know which connector on my D3 I use to plug the D4 loom into? Or am I missing something and a further modification required?

Thanks
  
Post #166785115th Jun 2016 2:16 pm
View user's profile Send private message View poster's gallery Reply with quote
WillyEckerslike
 


Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967

2007 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

As an alternative, you can buy the fog light loom and parking sensors loom separately, which is what I did. I'm sure I posted the part numbers on here somewhere.
  
Post #166787015th Jun 2016 2:51 pm
View user's profile Send private message View poster's gallery Reply with quote
Mews
 


Member Since: 23 Feb 2016
Location: North East
Posts: 136

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Ah I didn't realise I needed to buy two separate looms, thought I needed the D4 loom and it would plug in to the D3 connector on the car.

Can I not use my old D3 fog light loom for the fogs and still use the D4 loom just for the parking sensors ?
  
Post #166792515th Jun 2016 4:34 pm
View user's profile Send private message View poster's gallery Reply with quote
Mo
 


Member Since: 15 Sep 2016
Location: Thurrock
Posts: 174

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Hi Mews,

How did you resolve this issue please?

I'm currently having similar worries.

Cheers,

Mo
  
Post #179694428th Mar 2017 6:29 pm
View user's profile Send private message View poster's gallery Reply with quote
Mews
 


Member Since: 23 Feb 2016
Location: North East
Posts: 136

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Hi, I used a D3 loom complete with both fog lamp and parking sensor connectors Thumbs Up
  
Post #180194310th Apr 2017 11:16 am
View user's profile Send private message View poster's gallery Reply with quote
Mo
 


Member Since: 15 Sep 2016
Location: Thurrock
Posts: 174

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Thanks Mews,

I bought something similar from PowerfulUk. Paid £135 for the loom.
  
Post #180195010th Apr 2017 11:31 am
View user's profile Send private message View poster's gallery Reply with quote
Narpy
 


Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830

2005 Discovery 3 TDV6 S Manual Cairns BlueDiscovery 3

Wow!!!! Shocked

Mine was £14 delivered off eBay. Wink
 Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here. 
 
Post #180196810th Apr 2017 12:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Mo
 


Member Since: 15 Sep 2016
Location: Thurrock
Posts: 174

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

14 quid? Now you're making me feel like Big Cry Big Cry Big Cry
  
Post #180197110th Apr 2017 12:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site