Member Since: 31 May 2013
Location: Birmingham
Posts: 226
D4 Front parking sensors not working
Hi all,
So, I have just realised that my front parking sensors are not working. I have a 2010HSE, bought used, but I don't remember them ever working.
Is there a manual override somewhere? Do they have a separate fuse?
Ta.D4 HSE all the way
21st Nov 2013 5:31 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
you need to get the faults read and cleared and then have each sensor tested with diagnios unit like a faultmate msv
you then will only need to replace the sensor that is causing the error, and at about 90 each from the stealers one is enough, or contact Lewis via my upgrade thread for one for £8 each!!FFRR SC 4.2
Member Since: 31 May 2013
Location: Birmingham
Posts: 226
D4 HSE all the way
21st Nov 2013 8:30 pm
Mambosasa
Member Since: 31 May 2013
Location: Birmingham
Posts: 226
I give up. Nothing is coming up on the tool, so does this suggest that there is physical damage to the sensors? If so, how do I check and replace if required?D4 HSE all the way
15th May 2014 10:02 pm
FenRob
Member Since: 24 Mar 2014
Location: Fenland, Cambs
Posts: 130
Front sensors only operate if you first engage reverse gear, and go back into Drive. No idea why, though it does stop them from beeping when stopped in traffic and pedestrians cross in front if the car.
15th May 2014 11:12 pm
mse
Member Since: 27 Jun 2005
Location: Shropshire
Posts: 2702
Unfortunately not any more on the 2014 - they now turn on everytime you stop and got to N..it gets a little tiresome
On the earlier versions you can push the dash button when in drive to turn them all on.Mike
Which tool do you use to code read? IID?Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
16th May 2014 2:30 pm
Mambosasa
Member Since: 31 May 2013
Location: Birmingham
Posts: 226
Strange.
I took the car to a garage and it's clear of any fault codes. Checking the wires, they all seem to be connected.
Do I need to replace the whole loom and sensors? Any other way of narrowing the search down to the root cause?D4 HSE all the way
21st May 2014 9:55 pm
Griffmaster
Member Since: 24 Jun 2006
Location: Different Planet
Posts: 206
I have a 2010 D4 which has the console switch to activate the front sensors if not having engaged reverse first.
If you press this switch in does it still illuminate, the switch to the right of the Hazards?2015 D4 HSE in Corris Grey
All below gone but still with happy memories
2010 D4 XS in Stornaway Grey
2006 D3 S in Zermatt Silver
2001 Td5 Oslo Blue
1993 300Tdi Arken Grey
25th May 2014 9:16 am
Mambosasa
Member Since: 31 May 2013
Location: Birmingham
Posts: 226
Interesting.
I just tried it and no, I don't get the light to come on when I press it. The light does come on when I select reverse, but otherwise, no dice.
Any suggestions?D4 HSE all the way
25th May 2014 6:58 pm
Griffmaster
Member Since: 24 Jun 2006
Location: Different Planet
Posts: 206
Even when 'D' selected and with the rear end sensors out of range of something?
i.e. With mine, rear out of range of obstacles, from P into D then press the switch in an it lights up continuously, yours does not?2015 D4 HSE in Corris Grey
All below gone but still with happy memories
2010 D4 XS in Stornaway Grey
2006 D3 S in Zermatt Silver
2001 Td5 Oslo Blue
1993 300Tdi Arken Grey
26th May 2014 11:42 am
Mambosasa
Member Since: 31 May 2013
Location: Birmingham
Posts: 226
No.
It's strange as when it stick it into reverse, the light does come and I can switch off if I want to. So, I am not really sure what is actually happening.D4 HSE all the way
26th May 2014 2:19 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
There is a setting in the CCF, it can be set to Rear only, Both or None, might want to check it just in case...http://www.gap-diagnostic.com/
26th May 2014 5:13 pm
petersw
Member Since: 17 Nov 2012
Location: Norfolk
Posts: 1135
On mine you need to be going slow (under 5mph ? ) for it to come on pushing the button.Peter
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
