Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
my D4 project
Guys, I have finally uploaded some photos of my D4 into my GALLERY . I ended up going with a Traxide dual battery system - but using a thumper in the rear (located within the ORS drawer system when fitted / or up against cargo barrier when ORS is not fitted). I also added extra LED lighting which I found very handy in my D3.
ARB air compressor under the bonnet;
Uniden UHF which I remove when not needed (plug in hidden down by drivers left knee).
Under body protection at front (LR / Mantec); GOE compressor guard;
Here are some photos:
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
Last edited by StornowaySA on 31st Oct 2010 10:58 pm. Edited 1 time in total
30th Oct 2010 8:35 am
~Rich~
Member Since: 16 Mar 2009
Location: Sydney
Posts: 628
Awesome
Love your drawer system too. Where did you get it and about how much was it?
Where is your LLAMS dial fiited?
Nice work
Rich2014 SDV6 HSE White, LLAMS Height Controller, Tinted Glass, Tuff Ant Sliders and 18" steel wheels, Safari Snorkel, Rhino Rack Platform, ARB Air Compressor, Custom Drawer and storage unit -http://www.box.com/s/jem0ilac3cner2mexq64 UHF CB, 4x4 Intellegence RWC, 120ltr Long range tank, Rock Sliders and Compressor protection plate Beanie grill, De Tango.
30th Oct 2010 8:54 am
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
Cannot view the pictures can you put them in your gallery MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
30th Oct 2010 9:50 am
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
Rich
Drawer system out of NSW - ORS - Off Road Systems; Around $2750 with Fridge slide, removeable table (rhs) etc etc. tied down to existing tie down points; I confess LLAMS isnt fitted yet - arrived Friday - so will let you know where switch is in a week or two!
ChrisMY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
30th Oct 2010 10:44 pm
WayneD
Member Since: 11 Sep 2007
Location: Sydney Darwin ,Singapore, USA, UK and now country NSW
Posts: 531
ORS did my draw sytem too. It was the first one they had done for a D3. I see the design has not changed.
They are easy to remove if you want to carry other gear. The only problem is that if you have a flat you have to take one set out to get the rear seat up and thats why I went with the 4x4Intelligence rear wheel carrier.
Nice looking D4 Take the road less traveled. Dual battery system.ORS drawers,LR cargo Barrier.ARB Bull bar,side protection bars,Mickey Thompson ATR's 17" rims, Rear wheel carrier, radiator guard TPMS Mitchell Bros Tow Hitch LR RAI Steel Rims , GME UHF, Off Road GPS, Llams (yet to be fitted)
31st Oct 2010 12:57 am
Bushwanderer
Member Since: 27 Nov 2007
Location: Northern Rivers, NSW, Australia
Posts: 2050
Hi Wayne,
Did you fit your RWC yourself? If not, who did you get to fit it for you?
Best Wishes,
PeterThe Bearded Dragon
31st Oct 2010 4:32 am
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
Yes, I had Opp Lock fit the rear wheel carrier on my old D3 - but had a 115litre fuel tank too so no choice; certainly with drawer system in I'd want spare on roof; ultimatley would love the LR tank and RWC again on d4 - but I think I have spent enough on the D4 for the moment!!MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
31st Oct 2010 9:20 am
WayneD
Member Since: 11 Sep 2007
Location: Sydney Darwin ,Singapore, USA, UK and now country NSW
Posts: 531
Hi Pete
I had Graeme Cooper at St Peters fit the RWC and they did a good job, cant remember what they charged but it was the first one they had done so would be quicker now as I know they have done a few.Take the road less traveled. Dual battery system.ORS drawers,LR cargo Barrier.ARB Bull bar,side protection bars,Mickey Thompson ATR's 17" rims, Rear wheel carrier, radiator guard TPMS Mitchell Bros Tow Hitch LR RAI Steel Rims , GME UHF, Off Road GPS, Llams (yet to be fitted)
31st Oct 2010 9:42 am
Bushwanderer
Member Since: 27 Nov 2007
Location: Northern Rivers, NSW, Australia
Posts: 2050
Hi Wayne,
Thanks for your reply.
I probably would have gone with GC, failing advice to the contrary from you.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
can you put them in your gallery 
Did you fit your RWC yourself? If not, who did you get to fit it for you?
