Member Since: 14 Feb 2019
Location: Berkshire
Posts: 29
D4 under tray bolts.... where to source?
Hi, I need to order some of the 10mm bolts that hold on the engine under tray. Can anyone point me in the right direction for original LR ones or the part number etc?
Many thanks in advance
Darren
20th Jan 2020 1:39 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
I wouldn’t fit the crap LR ones, I bought Stainless bolts as I really do t want to be angle grinding them off a second time.012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
20th Jan 2020 1:43 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
I used Kay’s too, pretty much the same bolts in SS for less money. On my car the only ones I couldn’t match were the wasted type at the rear, so I just put them in my lathe and put the wasted section in.012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
21st Jan 2020 9:35 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13604
Hiya
Indeed always found them very good for price , inc fast delivery , used SS bolts around the disco , ie air tank, etc
May i ask , what are the wasted ones ur mentioning plse
21st Jan 2020 9:51 am
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
The wasted bolts are normal looking bolts that have the shank of the bolt machined down (more likely Forged) leaving just the thread area and a small shoulder at the head at the correct diameter. This supposedly helps the bolt not seize into the hole however, that doesn’t always work.
012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
21st Jan 2020 2:27 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13604
Wow, everyday is a school day as I’ve never seen those before
Where did u fit them plse on the landy and that’s some serious skills with the lathe
Bless u as always as it’s so nice to learn something new
Another very happy customer of Kays here too. When I first removed the underbody shields a few of the bolts had damaged heads and have been replaced with stainless from my stock. I try to buy A4 stainless where available. See some of my collection below...
Regards,
Steve
22nd Jan 2020 1:49 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13604
Thought I was bad for collecting spares
Have used this company a lot as they sell second hand bins in different sizes that are cheap
Think I’ve bought nearly a 100x bins already, doesn’t take long to fill them up with all the small nuts, bolts terminals, etc etc , just need to organise them as u have on a rack; shelving system
22nd Jan 2020 3:15 pm
ratrunner
Member Since: 20 Nov 2015
Location: cotswolds
Posts: 194
Re: D4 under tray bolts.... where to source?
dazzer252 wrote:
Hi, I need to order some of the 10mm bolts that hold on the engine under tray. Can anyone point me in the right direction for original LR ones or the part number etc?
Many thanks in advance
Darren
Is that 10 mm M6 size do you know ? cheers malc
23rd Jan 2020 6:08 pm
leeds
Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4312
If using stainless fastners I would suggest you use an anti seize paste which has anti corrosion properties. Slightly messy to use but pays dividends when coming to undo them.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
