Dimming DRL,s when indicating on 14 style headlights upgrade
Hi all , after many years of the forum from which I have found much useful information ( many thanks to Martin , Narpy , disco mikey , Robbie , BBS spy , Steve Norman and countless others )
I found myself hunting high and low for info on the above, but to no avail.
So I rolled my sleeves up and after a little light browsing of wiring diagrams !!!! , I finally decided on a plan and this now completed leads me to sharing this with you as some contribution to the site.
It also might stop my son Thomas from nagging me as he kept on about upgrading his disco 3 to disco 4 with 14 style headlights.
My solution consists of piggybacking the two indicator outputs below the steering column as these are just a connect to ground signal going to the CJB.
I wil try to add photos as I go
First remove three screws below steering column and split cowling, next to the indicator stalk there will be a black flat connector, you need to piggyback pins 2 and 3 green / yellow and green / orange then run some two core out of the drivers footwell via a grommet along the trunking at the back of the engine compartment to the battery compartment.
I decided to have the relays up there so ran some multi core to each headlight.
I hope you understand this as it was a brainstorm whilst having a cup of tea one afternoon on an old envelope
Ill just put up some other images
This is the steering column end
This is headlight end with resistors on indicator
This is the finished article
I also did the relay to make the flash work.
The trouble is I now want to do my 2012 disco 4 !!!!
Well I suppose it will be a bit easier
Sir ... 4 posts in 6 years. Clearly one for quality over quantity .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
6th Aug 2019 8:24 pm
farmer5
Member Since: 18 Aug 2013
Location: Bath
Posts: 8
That’s the trouble with fat fingers,but there good for some things. !
6th Aug 2019 8:27 pm
Hairy47
Member Since: 13 Jul 2017
Location: Bradford
Posts: 277
Ooh👍 wonder if would work on discovery 3 also 🤔
7th Aug 2019 7:41 am
Oswiperus D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1600
It is a D3! Stu
2016 D4 Landmark current
2022 Defender D300 SE Gone
D4 2014 XS Commercial - Gone
D4 2016 hse lux montalcino red - Gone
D3 2005 se java black - current
D3 2005 base manual - gone
D2 1999 TD5 E white - current
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum