Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Disco 3 oil vent crankcase separator replacement
Post Reply  Down to end
Page 1 of 1
dersealtd
 


Member Since: 16 Aug 2021
Location: Hythe
Posts: 97

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Keswick GreenDiscovery 3
Disco 3 oil vent crankcase separator replacement

Hi everyone,

I had some oil leak coming from top of the engine, looks like oil separator o rings loose on right leg,
Anyone have any idea how often should the separator be replace?

Thanks
  
Post #230469618th Aug 2022 8:28 pm
View user's profile Send private message View poster's gallery Reply with quote
surlymatt
 


Member Since: 23 Apr 2015
Location: Australia
Posts: 4

Australia 2009 Discovery 3 TDV6 HSE Auto Unknown ColourDiscovery 3

Pretty sure I've got the same issue. Not much on the topic around unfortunately.
Oil dripping down the back of the engine and onto the exhaust crossover pipe on mine.
Starts to smell of oil on uphill runs.
  
Post #230771115th Sep 2022 1:16 pm
View user's profile Send private message View poster's gallery Reply with quote
dersealtd
 


Member Since: 16 Aug 2021
Location: Hythe
Posts: 97

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Keswick GreenDiscovery 3

Hi
Got it done, its easy to check, basically look from top where the both legs of the separator going to engine block, if its loose then gaskets need replacing, and also if its leak you will have oil all round even on glow plugs, i have changed all seals and got new oil separator problem gone no more oil leak,
had some luck Smile because oil was all over the top my glow plugs they came off very easily,

all best
  
Post #230771515th Sep 2022 1:26 pm
View user's profile Send private message View poster's gallery Reply with quote
surlymatt
 


Member Since: 23 Apr 2015
Location: Australia
Posts: 4

Australia 2009 Discovery 3 TDV6 HSE Auto Unknown ColourDiscovery 3

Are they special gaskets or just o-rings?
  
Post #230772015th Sep 2022 1:47 pm
View user's profile Send private message View poster's gallery Reply with quote
dersealtd
 


Member Since: 16 Aug 2021
Location: Hythe
Posts: 97

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Keswick GreenDiscovery 3

special, like o ring but in metal housing you need proper ones
  
Post #230772615th Sep 2022 2:10 pm
View user's profile Send private message View poster's gallery Reply with quote
dersealtd
 


Member Since: 16 Aug 2021
Location: Hythe
Posts: 97

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Keswick GreenDiscovery 3

and you install then on the engine block
  
Post #230772715th Sep 2022 2:11 pm
View user's profile Send private message View poster's gallery Reply with quote
BradC
 


Member Since: 29 Apr 2019
Location: Perth
Posts: 118

Australia 2008 Discovery 3 TDV6 XS Manual Izmir BlueDiscovery 3

Not expensive, so do both while you're in there. Part No 1337060. When I bought them locally they were $12AUD each on the shelf.

There is a special place in hell waiting for the person in Landrover that wrote the manual section 303-08C with the line "Reposition the crankcase vent oil separator."

That's not unlike "Fit feet of both legs to respective stirrups, insert arm and remove baby", without the "assembly is the reverse of removal".
  
Post #230773515th Sep 2022 4:12 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site