Member Since: 08 Jun 2020
Location: Saltash
Posts: 14
Disco 4 Driver Seat Belt and 3rd Row Part Numbers
Afternoon all,
MOT time is coming and my trusted Garage has warned that it will fail on the driver and both 3rd row seatbelts. Previous owner had at least one dog that used them as chew toys!!
I was looking on fleabay for replacements and found a driver side belt off a breaking Disco 4, but the part number is slightly different. Does anyone know if the difference matters? Has one superceded the other?
Part number of the damaged one in my car is 8H22-F61294-ADW
Part number from breaker is the same but for ACW at the end. Does with mean it's just a bit older?
--
The 3rd row numbers are:
o/s 4H22 N611 B69 ABW
n/s 4H22 N611 B68 ABW
If anyone's selling these (or even all 3) please drop me a message.
Hoping to get these done without having to remortgage the house to pay for new ones!!
Chris
22nd Sep 2020 12:45 pm
Balders of Cornwall
Member Since: 08 Jun 2020
Location: Saltash
Posts: 14
The only one I can't seem to find on it's own on ebay is the near side 3rd row. I contemplated getting the front passenger seat version but the plastic buckle stop is in a different place (measured the distance between the plastic 'button' stop and the bottom bolt anchor and that's the only difference.
It would irritate me to have the 3rd row buckles handing at different heights, so will have to keep looking for the proper part.
23rd Sep 2020 10:47 am
Balders of Cornwall
Member Since: 08 Jun 2020
Location: Saltash
Posts: 14
Click image to enlarge
Pics of the 3rd belts. Previous owner's dogs did a number on them!!
The buckle stop is 35cm from bottom edge of the plastic button, to the end of the belt fabric.
Have also just noticed that previous owner(s) replaced the n/s 2nd row, but used another o/s 2nd row. The buckle faces the wrong way. I really want to ignore that!
The reason I'm posting (other than in the hope that someone might pop up with some sanity saving advice, or a cheap 2nd hand part to sell) is to help the next person who finds themselves in the same situation. If I can save someone else a bit of hassle and working out, I'll be happy.
Chris
Click image to enlarge
23rd Sep 2020 11:02 am
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
Member Since: 08 Jun 2020
Location: Saltash
Posts: 14
The replacements were already ordered, but the re-webbing idea is good for the future.
Found the replacements on eBay. The 3rd row left was the trickiest to find, and most expensive. Loads of right versions, very few left versions.
Just for them and it's great to have MOT compliant belts back in the 3rd row 😁
9th Oct 2020 1:24 pm
Balders of Cornwall
Member Since: 08 Jun 2020
Location: Saltash
Posts: 14
I have installed both 3rd row belts, and they look great.
I have also replaced the driver's belt (but putting the trim back in place will have to wait until the morning). However, the replacement doesn't have the little button stopper thing to stop the buckle from sliding all the way down to the seat. My new mission is to prise the button off an old belt and put it on the replacement.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
