Member Since: 14 Nov 2019
Location: Torridge, North Devon
Posts: 45
Disco 4 off road protection fabricators
Hello team,
Just wondering if you know of any people who make off road protective kit for Disco 4's that doesn't cost the earth?
A steering guard with cut out for towing eye, most people want £350 for that... which is to my mind a complete rip off.
shire Fabrications do rock sliders for £200 ish for the D4, when most other places want £500, so anybody got any leads?
Thanks.Mike
Driving:
2016 Discovery 4 SDV6 HSE
2002 Discovery 2 Td5 ES Auto
2012 Toyota Yaris Hybrid
6th May 2021 11:54 am
LRD4GAB
Member Since: 05 Nov 2020
Location: Tamworth
Posts: 504
I recommend wildbear, Andy Wilkinson top man,top quality
6th May 2021 1:36 pm
kirkyworld
Member Since: 01 Mar 2016
Location: Northampton
Posts: 566
RLD on here does, spare wheel theft protection, front steering guards, not sure what else.
6th May 2021 1:37 pm
dragonred
Member Since: 14 Nov 2019
Location: Torridge, North Devon
Posts: 45
LRD4GAB wrote:
I recommend wildbear, Andy Wilkinson top man,top quality
I had a look at these guys. But I just feel most of the Disco 4 stuff is just way too expensive for what it is. I could get 3 protective items for the D2 for the cost of one on the D4.
kirkyworld wrote:
RLD on here does, spare wheel theft protection, front steering guards, not sure what else.
Nice Kirky, and how does one find and contact this gentleman?Mike
Driving:
2016 Discovery 4 SDV6 HSE
2002 Discovery 2 Td5 ES Auto
2012 Toyota Yaris Hybrid
6th May 2021 7:43 pm
dragonred
Member Since: 14 Nov 2019
Location: Torridge, North Devon
Posts: 45
kirkyworld wrote:
RLD on here does, spare wheel theft protection, front steering guards, not sure what else.
Ah! Found the good sir! I got a younger member of the family to assist me!Mike
Driving:
2016 Discovery 4 SDV6 HSE
2002 Discovery 2 Td5 ES Auto
2012 Toyota Yaris Hybrid
6th May 2021 7:47 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4252
Just had a sump guard made for my D4 by Ray (RLD) and, as always, it is superb.. highly recommended and nowhere near the prices you have been quoting
If there’s a particular item you’re after put up a “wanted” ad... people often have bits tucked away that they’ve not thought about for years (me especially )I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
7th May 2021 6:09 am
dragonred
Member Since: 14 Nov 2019
Location: Torridge, North Devon
Posts: 45
I've been PMing RLD one of my mates has a commercial D4 and he's looking for a guard too. So I may get two.Mike
Driving:
2016 Discovery 4 SDV6 HSE
2002 Discovery 2 Td5 ES Auto
2012 Toyota Yaris Hybrid
7th May 2021 5:37 pm
Kenny57
Member Since: 12 Apr 2020
Location: Essex
Posts: 173
Re: Disco 4 off road protection fabricators
dragonred wrote:
Hello team,
Just wondering if you know of any people who make off road protective kit for Disco 4's that doesn't cost the earth?
A steering guard with cut out for towing eye, most people want £350 for that... which is to my mind a complete rip off.
Thanks.
Completely sympathise, I have a full set of underbody protection on my D3 and yes, it's way more expensive than it should be. Challenged a couple of suppliers, who both said that they'd sold hundreds of sets of D2 stuff over the years and could buy/make it in quantity, but that D3/4 stuff was very low quantity so more expensive for all the usual reasons. One also admitted that there are a lot more suppliers of D2 protection so more price competition.
Fwiw I ended up going for a set of D44 guards from Devon4x4 which are heavy but extremely "substantial", then made my own for rear diff and exhausts. These are the D44....
12th May 2021 5:31 am
dragonred
Member Since: 14 Nov 2019
Location: Torridge, North Devon
Posts: 45
I looked at Devon 4x4, as its only about 40 to 45 minutes away from me. I could literally collect them myself. But, the cost for a few sheets of metal is ridiculous. Over £500 for rock sliders? I bought my D4's sliders from Shire fabrications for more than half the price of Devon 4x4, but, I don't know if Shire have gone bust or whatever, but they don't answer emails anymore... At least not to me. Shame, I liked their stuff.
At the moment, RLD is sorting me out a steering guard. Ideally I want a compressor guard as well if the compressor gets knackered we're screwed! And I already have the rock sliders. There is a plate on the engine already and the transmission is tucked up out of the way so the odds of knocking that should be very very low. I just don't want to weigh an already very heavy car down even more needlessly.Mike
Driving:
2016 Discovery 4 SDV6 HSE
2002 Discovery 2 Td5 ES Auto
2012 Toyota Yaris Hybrid
12th May 2021 9:48 am
kevin-t
Member Since: 12 Nov 2007
Location: sheffield
Posts: 682
Shire fab. Not gone bust..
I picked up some sliders Friday...You have to phone them.
Number is on website.......
12th May 2021 10:23 am
dragonred
Member Since: 14 Nov 2019
Location: Torridge, North Devon
Posts: 45
I sent 2 emails, both unanswered. I also phoned them and left a message. Then I sent a 3rd email which has also thus far gone unanswered. So, since they don't want to speak to me anymore, I have taken my custom elsewhere for the D2's protection.
If they can't be bothered to reply to a simple question, then how can I trust them with hundreds of pounds? Maybe they can't be bothered to post the stuff I've paid for?Mike
Driving:
2016 Discovery 4 SDV6 HSE
2002 Discovery 2 Td5 ES Auto
2012 Toyota Yaris Hybrid
12th May 2021 12:21 pm
Kenny57
Member Since: 12 Apr 2020
Location: Essex
Posts: 173
Yeh, I have the Shire Fab tree sliders too, best value on the market I could find and still good quality ihmo. And yes that's a lot of money for the what looks like a few sheets of metal, but it's 8mm Alloy. Have you tried bending or cutting holes in that stuff? I have and believe me isn't easy!
It's also quite heavy, but I figured nearly 3ton of Disco meeting a sharp rock would need something pretty significant to prevent it really spoiling my day in the middle of nowhere.
16th May 2021 6:24 am
pwheeldon
Member Since: 14 Jan 2020
Location: West Yorks
Posts: 1509
Kenny57 wrote:
dragonred wrote:
Hello team,
Just wondering if you know of any people who make off road protective kit for Disco 4's that doesn't cost the earth?
A steering guard with cut out for towing eye, most people want £350 for that... which is to my mind a complete rip off.
Thanks.
Completely sympathise, I have a full set of underbody protection on my D3 and yes, it's way more expensive than it should be. Challenged a couple of suppliers, who both said that they'd sold hundreds of sets of D2 stuff over the years and could buy/make it in quantity, but that D3/4 stuff was very low quantity so more expensive for all the usual reasons. One also admitted that there are a lot more suppliers of D2 protection so more price competition.
Fwiw I ended up going for a set of D44 guards from Devon4x4 which are heavy but extremely "substantial", then made my own for rear diff and exhausts. These are the D44....
Do you mind me asking how the arm guards are attached? I've bought some used ones but no instructions.
If anyone's interested the guy I bought the arm guards off was also selling the steering guard for a D3.Discovery 4 GS 2009 Auto Stornoway Grey
Discovery 3 s 2005 Auto Bonatti Grey Gone
Discovery 3 SE 2005 Manual Zambezi Silver Gone
Range Rover Sport HSE 2006 Black
Aston Martin DB7 VV
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
