Intears
Member Since: 14 Jan 2010
Location: Essex
Posts: 12
|
Dog Guard with loadspace divider for Disco 4 |
|
Hi,
Does anyone know where I can get a Discovery 4 Dog Guard, the mesh one, with the divider? Also how easy it is to take the divider in and out. Any advice on how many dogs can fit in the sectioned off part ideally I'd like to fit 2 labs in. The otherside will have to fit a twin buggy.
I have found the mesh dog guard with the partition loadspace with locking gate on famousfour.co.uk, but for them both is over £300.
I can have up to 4 Labradors in the boot at one time. At the moment I have to take my Lintran box in and out but this is becoming increasingly hard work, those things are not light and I swear it's having an impact on my MPG. Not only that I need to dismantle the buggy to get it in in front of the dog box.
Thanks
|
30th Jun 2010 10:26 am |
|
|
MrH
Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754
|
The Load/Cargo Barrier and Divider are the same for Disco3 & 4.
The Divider is simple to install/remove and can be fitted off centre - although them the gate won't work without modification.
We have two GSDs and although we'd normally put one either side of the divide (before we changed to a dog crate) they often decided to travel both in the same side of their own accord. I guess it depends on how well your dogs get on and how far/long a journey. Personnally I wouldn't go much more than 90 minutes with them in the same side if the boot is equally divided into halves.
|
30th Jun 2010 11:21 am |
|
|