| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
crasha
Member Since: 25 Oct 2005
Location: Wiltshire
Posts: 67
|
| Failure to start (selector not rising, brake pedal hard) |
|
Anyone else had a breakdown issue due to a D4 (2016) failing to start?
Finished a 70 mile journey, stopped off at a friends, came back to the car within 5 minutes, tried to start:
1. The ignition switched on as normal. No indication of battery issue.
2. The brake pedal was very hard and difficult to depress.
3. The gear selector failed to rise.
4. The car would not crank over on using the start button with brake pedal depressed.
The gear selected was showing park, but not rising. A firm shove a few times on the brake pedal did not help. Getting out and locking the whole car for a few mins then repeating did not help either.
Anyone else experienced similar or know how to fix?
I did have a 2010 6 speed disco 4 that once had the same issue with a hard pedal and would not shift from park, very aggressive pedal depress fixed it.
Thanks all
crasha
|
 11th Jan 2020 11:29 pm |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20726
  
|
Gear Shift Module
Becoming fairly common, done a few now
The GSM provides an earth path back to the BCM when in P/N. When the module fails, this earth path is not provided, hence the non start situation  My D3 Build Thread
TDV8 Retrofit Build Thread
|
| 11th Jan 2020 11:48 pm |
|
|
crasha
Member Since: 25 Oct 2005
Location: Wiltshire
Posts: 67
|
Thanks Mikey, I will likely need the AA to therefore recover it tomorrow morning, unless it is something else entirely... appreciate the response. regards crasha
|
| 11th Jan 2020 11:55 pm |
|
|
galwaygreen
Member Since: 30 Oct 2011
Location: plymouth
Posts: 6525
 
|
mine done on warranty
|
| 12th Jan 2020 12:34 am |
|
|
fat bloke
Member Since: 07 Aug 2006
Location: OXFORD
Posts: 1243
|
Mine got recovered Friday same problem but with rotary knob stuck in reverse no start.
|
| 12th Jan 2020 5:15 pm |
|
|
|
|
crasha
Member Since: 25 Oct 2005
Location: Wiltshire
Posts: 67
|
Thanks all for replies it is getting will be recovered hopefully tomorrow. AA man for 90 minutes and on the phone with Land Rover could not get it started.
|
| 12th Jan 2020 8:15 pm |
|
|
crasha
Member Since: 25 Oct 2005
Location: Wiltshire
Posts: 67
|
A veritable stack of error messages found by the nice AA man
Patrol found the following fault code/s:
System : Engine control - 7M9 / Diesel EDC 17CP11.2 Status :U0447 - CAN message from central gateway.
Error Message : Malfunction. Historical fault.P2BAE00 - Unknown fault.
Error Message : .P2BAE02 - Unknown fault.
Error Message : .P2BAF00 - Unknown fault.
Error Message : . Status :P0A0F - Engine does not start.
Error Message : Faulty operation. Error sporadic.P049400 - Unknown fault.
Error Message : . Status :P0671 - Glow plug, cylinder 1.
Error Message : Internal fault. Error static. Status :P0672 - Glow plug, cylinder 2.
Error Message : Internal fault. Error static. Status :P0673 - Glow plug, cylinder 3.
Error Message : Internal fault. Error static. Status :P0674 - Glow plug, cylinder 4.
Error Message : Internal fault. Error static. Status :P0675 - Glow plug, cylinder 5.
Error Message : Internal fault. Error static. Status :P0676 - Glow plug, cylinder 6.
Error Message : Internal fault. Error static. Status :P064C - Glow control.
Error Message : Internal fault. Error static. Status :P061B - Internal control module torque control. Error Message : Faulty operation. Historical fault.P21C564 - Unknown fault.
Error Message : . Status :U0402 - CAN message, transm. control unit.
Error Message : Malfunction. Historical fault. Status :U0146 - Communication with gateway A.
Error Message : Missing message. Historical fault.P05ED16 - Unknown fault.
Error Message : .Suspect body control module.
Left vehicle in neutral for onward recovery.
|
| 12th Jan 2020 10:17 pm |
|
|
Nikki
Member Since: 10 Mar 2015
Location: Melbourne
Posts: 140
|
Dying battery? 2003 D2a Auto TD5 good Landy gone
2015 D4 probably the most amazing yet, why get a RR?
|
| 14th Jan 2020 11:23 pm |
|
|
idlewis
Member Since: 03 Apr 2016
Location: Kent
Posts: 14
|
Hi crahsa,
Bumping this old thread as I have hit the very same issue as yourself and I'm keen to understand how big a PITA it was to resolve - how long did it take and was it pricey to fix? As it's a Land Rover product and electronics are involved I am assuming the answers will be a long time and a lot of money? 
Many thanks,
Ian.
|
| 4th May 2021 5:01 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
