Member Since: 01 Aug 2015
Location: Lincolnshire
Posts: 147
FBH Ceramic burner gaskets - where to source?
Thought I'd ask this on a separatre post, in case it's more use than subsuming in an existing thread.
Does anyone have a source for the gaskets that separate the ceramic burner top section from the metal base, as shown from Robbie's FBH service guide:
Click image to enlarge
Having cleaned by FBH (twice now in the last fornight) - I still can't get it to start reliably and the next step, to my mind, is to separate out the burner top section, to see if it has excessive carbon deposits, or a clear issue wtih the burner cup for example. However, I don't want to separate it if I can't replace those gaskets.
Cheers,
John
17th Dec 2018 11:16 am
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
Mine wouldn’t start reliably and I cleansed it, messed about and in the end replaced it. Turned out it was the fuel pump that’s fitted near the gearbox cross memeber that was my issue. Even when I checked the pump measuring how much fuel was supplied in a given time and it appeared ok but replacing the pump cured my problems 100%.
I know this doesn’t answer your question in any way but thought I would mention it as it may help.
Pete.IID, webasto software and workshop facility's available.
22nd Dec 2018 12:11 pm
kayble
Member Since: 01 Aug 2015
Location: Lincolnshire
Posts: 147
The gaskets on mine came out more or less intact - little bit missing on the section between the main gasket and the hole for the glow plug - but have reused them in any case.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum