Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
FBH timed Climate / remote ccf settings ??
Help please.
Can anyone please give the info on activating FBH settings on MY16 D4 Graphite with Sat Nav etc.
Have tried to pm Bodsy, but can't due to not having enough posts yet !
Have contacted local Indy who are willing to have a go, next Thursday, having never been asked this before.
Details on settings / procedure to enable timed climate and remote,
with a view to adding remote at a later date, would be appreciated.
Too far away from known members who can do it.
Thanks in anticipation.
28th Nov 2018 6:25 pm
charlietortoise
Member Since: 29 Oct 2011
Location: Staffordshire
Posts: 511
Member Since: 03 Sep 2018
Location: Staffordshire
Posts: 585
Dead easy to do. I bought an iid tool from a member on here for £300, works out cheaper in the long run than paying £50 a pop to have settings altered.
It's just a case of enabling them (choice of disabled/enabled on iid app). From memory, there's three to do I think. timed climate, remote and fbh
Works a treat.
Hope that helps.
29th Nov 2018 9:56 am
Pete Hancock
Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
FBH activation info wanted
Started a topic yesterday, but didn't realize I had raised it in the Webasto section.
Tried to pm Bodsy, but can't until 3 posts !
Local Indy have never been asked about this, but willing to "have a go" next Thursday.
Any set up info appreciated.
29th Nov 2018 6:03 pm
Pete Hancock
Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
Thank You jamez79 and charlietortoise.
29th Nov 2018 6:04 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
Pete it's related to the FBH so this is the right section ...everyone will see it in the new post list and advise you accordingly
29th Nov 2018 6:23 pm
Pete Hancock
Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
Every day is a learning day.!
29th Nov 2018 6:31 pm
Jon D4_Driver
Member Since: 12 Dec 2021
Location: Leicestershire
Posts: 1
Hi Pete,
Did you manage to activate the "Time Climate" feature? I am also looking to do this, but am a little undecided on IID or iCarsoft.
I wonder if anyone else had any good/bad experience with iCarsoft on this particular issue or in general. Currently Amazon has a deal on iCarsoft EU Pro.
Thanks.
Jon
12th Dec 2021 7:23 pm
Pete Hancock
Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
Hi Jon,
Yes, got a second hand genuine set from a forum member, and sorted the CCF settings with the IID Tool.
Would definitely go for the genuine set, plug and play.
Must be the T91R receiver, (VW version a lot cheaper on fleabay looks same but the connector is wrong).
Receiver and aerial go behind drivers side rear panel, slide on fitting and plug will be there (probably wrapped in grey foam).
Same for the IID BT. may seem pricey, but considering that you can enable extras as well as fault finding / settings, which a dealer will charge you £100+ per pop, will very soon pay for itself, and easily sold on if you move away from LR.
Regularly come up in the For Sale section.
Pete.
13th Dec 2021 2:09 pm
disco32009
Member Since: 12 Oct 2009
Location: worcestershire
Posts: 295
Fbh
Hi Pete, any chance of abit of a guide to how you installed it etc, got the module,fob and iid tool, just waiting for the antenna to arrive then I will be installing it
17th Nov 2022 7:44 pm
Green Land Rover
Member Since: 21 Oct 2017
Location: Stourbridge
Posts: 412
Ought to be a sticky reallyDiscovery 4 HSE - Aintree Green
Freelander 2 TD4 SE Automatic - Tonga Green
Defender XS - Tonga Green - Gone Now
Freelander 1 Td4 ES Manual - Epsom Green - Gone Now
Freelander 1 Td4 Kalahari SE - Epsom Green - Gone Now
Freelander 1 XEi - Epsom Green - Gone Now
Member Since: 16 Jun 2022
Location: South Kerry
Posts: 114
Hi guys,
My FBH runs automatically according to the outside temperature. I've also set the "timed climate function" with IIDTool. But I'm asking if a generic remote (like on eBay) is compatible with the normal functions above. Especially, what about the connection on the pin 2 (the famous "red wire" / W-bus) that exists on my D4... Do I just take a jumper on it ?
Thanks.
Edit : Just picking a wire on the red one didn't work. I had to cut the wire and to connect on the FBH end. Works perfectly with diagnostic cable and Thermo test software but NOT with remote controller... (explain in another thread).
Last edited by Shamrock on 13th Dec 2022 5:16 pm. Edited 1 time in total
19th Nov 2022 11:48 am
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Can this be activated in my d3?
I see early models can and mine is 2004 plate
Have gap iid to do Ccf if it is possibleDisco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
22nd Nov 2022 1:27 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
Well no, because the firmware got over written.
Didn't you order a box from ebay?
22nd Nov 2022 6:36 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Hey mate yeah I did order one it all works fine but if it was possible I’d have preferred timed and original
This kit works fine
And I did since see a gap web page confirming d3 is not possibleDisco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
