Goswin
Member Since: 02 Oct 2008
Location: s-Hertogenbosch
Posts: 47
  
|
| First LR3 addition -> Success .. next one waiting |
|
Hi,
I have just built in the Bluetooth carkit from Land Rover in my LR3. I also installed the steeringwheel addition and the voice control unit.
Everything is working great... Voice commands etc.,etc..
Now my next project is waiting: I'm going to install the original Sat Nav DVD unit and screen from Denso into my SE. Don't tell me this does not function, because I will get it to work 
But I need some help here. Starting with the pin-out of the screen and the nav unit. Who can help me with this? I have been searching the internet for these schemes but I haven't found them yet.
Who can help with these schemes?
Thanks and regards from the Netherlands,
Goswin de Rouw
PS: I have found a forum where someone installed the original Nav into a SE ... more details will follow
PS2: I have an IDS system so that might be handy for the sat Nav options programming I guess
|
 9th Dec 2008 11:21 am |
|
|
Goswin
Member Since: 02 Oct 2008
Location: s-Hertogenbosch
Posts: 47
|
Info on the LR3 Touch Screen Display:
The Touch Screen Display (TSD) is located in the centre of the instrument panel. The TSD is a touch sensitive 7 inch LCD VGA screen containing 800 x 480 pixels in a 15:9 format. The TSD is connected to the infotainment system on the Media Oriented Systems Transport (MOST) ring. The MOST ring is a fibre optic communications data bus that allows high speed transfer of control instructions and audio around the system.
The TSD processes its own video for system operation but receives the navigation graphics from the navigation computer on a dedicated serial link called GVIF (Gigabit Video Interface).
These are the signals going into the back of the factory navi touch screen:
Connector No C2819 Pin Out Table
Pin No - Description - Input/Output
1 Battery voltage - Input
2 Ground
3 Ground
6 Audio screen
7 Audio (-)
11 ACC - Input
12 Dimming signal - Input
14 Private CAN high
15 Private CAN low
17 Audio (+) - Input
Connector No C2820 Pin Out Table
Pin No - Description - Input/Output
1 Video screen (Fibre)
Connector No C2825 Pin Out Table
Pin No - Description - Input/Output
1 MOST in - Input
2 MOST out - Output
|
| 9th Dec 2008 7:05 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
You fogot the GVIF connector
Connector No C2823 Pin Out Table
Pin No Description Input/Output
1 GVIF + Input
2 GVIF - -
3 GVIF Shield - G4 Gone ...but not forgotten
|
| 9th Dec 2008 8:56 pm |
|
|
Goswin
Member Since: 02 Oct 2008
Location: s-Hertogenbosch
Posts: 47
|
indeed. Thanks...
Do you also have the pin out for the sat nav computer from denso?
Bye,
G
|
| 9th Dec 2008 9:17 pm |
|
|
|
|
disco_doozle
Member Since: 03 Nov 2007
Location: Bree
Posts: 447
  
|
Goswin,
druk aan het sleutelen 
Always nice to encounter a "country-neighbour" inhere.... 
Welcome Disco 3 TDV6 Aut. 7 seat, Zambezi silver, Privacy glass, Rosen A9 DVD, Tow-kit, K&N airfilter, Frontrunner Windcheetah + 4xHella Comet 550, tailgate ladder, 5 breaklights , Performance BB6 17" + Duratracs 256/70R17, RLD Skid-plate, Traxide second battery setup, Lightguards, BAS EGR's blank kit, BAS Silicone hose, Black bonnet decal,
|
| 10th Dec 2008 11:04 am |
|
|
