I'm in the process of rebuilding a spare front diff, I've replaced one of the carrier bearings, but struggling to find the other bearing. The timiken part number is XAB32010XM - so far i have been unable to locate a supplier (I've tried the usual - wychbearings, simply bearings etc...) I can get X32010X which doenst fit (trust me i tried!). So, to thoses who have replaced both carrier bearings.. where did you get them from???[/quote]Si
2016 Disco 4 SE Tech
2019 Fiesta ST3
2021 GBS Zero
1st Jul 2018 1:49 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13649
Is this any help , wonder if they’ll sell just the one bearing u need
Thanks Guys - I'm only replacing the Diff Carrier bearing, like you say, the one i need is in the kits. So I have asked the question. I dont really want to spend £110 (or what ever it is) on a bearing that costs £20...Si
2016 Disco 4 SE Tech
2019 Fiesta ST3
2021 GBS Zero
2nd Jul 2018 7:49 am
BigElk
Member Since: 22 Jul 2017
Location: Peoples Republic of Kent.
Posts: 60
I found this thread earlier. Scroll right down and you will see bearing and seal numbers which are different to the ones you mention. Might help you out?
The part number of the one I removed was XAB-32010.XM - GOOD luck finding one!.
The one I have on its way is XAB-32010.X it's identical except it can take higher rotational speeds...Si
2016 Disco 4 SE Tech
2019 Fiesta ST3
2021 GBS Zero
2nd Jul 2018 2:17 pm
XDAndy
Member Since: 16 Jan 2018
Location: Gibraltar
Posts: 597
I should have been a bit more specific... I was unable to find a UK supplier as that one is from poland. :pSi
2016 Disco 4 SE Tech
2019 Fiesta ST3
2021 GBS Zero
3rd Jul 2018 10:36 am
irf
Member Since: 28 Sep 2005
Location: Herts
Posts: 106
I've learnt a lot about bearings in the last 24hrs !
The Timken 32010X has a cone back face "to clear" radius of 1.02mm and the XAB32010X has one of 3.05mm. The corner of the diff shaft that the inner has to match up has a larger radius than 1.02mm so the inner of the non XAB version won't push home fully.
As it happens I use a 32010 in my boat trailer so I have a few old ones kicking around from different manufacturers to look at.
The left one in the picture is a Timken XAB32010XM from my diff.
The middle one is a FAG. labeled as a 32010X which seems match up with the measurements for a Timken (non XAB) 32010X. The right hand one is a Challenge, labeled as a 32010 (no prefix or suffix). Interestingly it seems to have the larger radius of the Timken XAB.
I concur with SantaCruz findings on the M in the suffix but can find no UK supplier of the Timken XAB32010X or XM.
Advanced Factors provide non Timken (but quality manufacturer) as part of a full diff bearing/ seal pack that I assume will fit but they are waiting on stock.
I only need the XAB32010X and I need it ASAP ! - SantaCruz - where did you get yours ?
2016 Disco 4 SE Tech
2019 Fiesta ST3
2021 GBS Zero
17th Jul 2018 4:11 pm
irf
Member Since: 28 Sep 2005
Location: Herts
Posts: 106
Many thanks.
I did look at them originally but their website gave no expected shipping time for the cheap delivery and 5 - 10 days for the expensive. I should have called them - it turns out that the cheap delivery is DPD and 48hrs.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
as that one is from poland. :p
