Member Since: 18 Oct 2016
Location: Pemrokeshire
Posts: 585
Front diff removed.. Video of bearings
So finally was forced to drop my diff and pull my lh and rh drive shafts.
Relatively straight forward job as per guides on this forum.
Had an issue freeing up the front prop shaft as was siezed solid 🙈🤬 Anyway split the diff and this is what I found.. Would appreciate comments and opinions on condition of pinion bearing? Obviously the lh and rh bearings are fubard' yet they have surprisingly little wear on the rollers 🤔
When the bearing is loose like that you will have play, you need to spin it and judge from the sound. If there is any scoring on the mating face ring, then thats a clue they are worn.
Get a kit from Advanced Factors and change them all.
The pinion one is more invovled as there is a crushable sleeve that needs to be tightened to the correct torque and needs to have the pre-load set, otherwise it will whine when in use.
Flack
13th Sep 2019 7:07 pm
timmyt79
Member Since: 18 Oct 2016
Location: Pemrokeshire
Posts: 585
Ah yes forgot about that sleeve ! Thanks for reminding me before i pulled it off!Any idea on part number for sleeve?Is it included in the Advanced factors kit?
13th Sep 2019 7:10 pm
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 193
The sleeve have been asked for several times. Nobody knows where to get it. A shims together with the old sleeve is a possibility. Or some axle workshop maybe can get hands on one. The differentials is made by Dana.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum