Member Since: 12 Jul 2017
Location: Somerset
Posts: 21
Front drains on sunroof replace
Hi has anyone replaces the front passenger side sunroof drain?
I know it can be a bit tricky but I have time and a socket set.
Any photos would be helpful.
Also would anyone know where the rear drains are so I can check them.
Thanks All
21st Jun 2020 2:02 pm
dewillia
Member Since: 04 Aug 2019
Location: Wolverhampton
Posts: 71
Some good stuff on YouTube
21st Jun 2020 4:52 pm
Gazbaz902
Member Since: 12 Jul 2017
Location: Somerset
Posts: 21
YouTube
Yes I am searching for it now.
Got to love YouTube
21st Jun 2020 9:08 pm
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1520
Lots of info on this forum.
This topic covers most of what you'll need. Have done the job myself and contributed my knowledge, sources and experience to this particular topic.
Cheers
https://www.disco4.com/forum/passenger-sid...16740.htmlGary
-------------------------------------------
Discovery 4 HSE 2016MY
21st Jun 2020 9:49 pm
Gazbaz902
Member Since: 12 Jul 2017
Location: Somerset
Posts: 21
Drain tubes
Thanks just need to build up the courage to do it now.
21st Jun 2020 10:03 pm
Charliecloud
Member Since: 31 Jul 2014
Location: Tonbridge
Posts: 980
It's not to bad a job, with the comfort of having done it now
I was reluctant to remove the cjb and instead removed the front wing which is a doddle to do. I taped the new pipe to the old and in the A pillar and pulled it through and then connected the elbow and pushed it back into place. In hindsight all my drain pipes were in good nick with just he elbows having rotted out.
So if you have big hands and don't want the grief with the cjb, take the wing off
Good luck
22nd Jun 2020 8:46 am
Gazbaz902
Member Since: 12 Jul 2017
Location: Somerset
Posts: 21
Well done
Thanks that’s a thought how did you attach the pipes together?
Is the pipe easy to access from the outside (so to speak)?
Cheers Gary
22nd Jun 2020 5:31 pm
Charliecloud
Member Since: 31 Jul 2014
Location: Tonbridge
Posts: 980
I used a plastic bit of tube bought from ebay that is used for joining hoses. Push fit together in the 'A' pillar having pulled the old tube through the hole in the chassis using a pair of long nose pliers and a good grip so that it does not fall inside.
Having read reports of owners spending 3-4 hours trying to access the cjb I reckon an hour to remove & replace wing is a easier proposition, for me anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
