So many, many months ago one of our "pet" sheep decided to headbutt SWMBO's front near side door and not just once! Then rather frustratingly keeled over and died two weeks later
Not good:
I've looked at trying to get the dents knocked out but the inner strengthening bar is in the way so it was either a repair or insurance claim neither of which I fancied. So for sometime I have been on the look out for a replacement but Firenze Red is not the easiest to find. And then at the beginning of Lockdown I found one and although it was collection only after a few messages the salvage yard agreed to courier it.
It arrived two days later and turned out to be from a car only built 4 months before ours. I knew it was from a lower spec model so over a couple of days I swapped everything including the door mirror, external handle, wiring loom, the lot! (I had some time on my hands )
Put the donor door on, cleaned and polished the whole car and couldn't be happier 8)
Total cost £185
As with any of these jobs next time it would take half as long
Cheers,
Andy.2022MY Defender 110 D250 HSE X Dynamic, Gondwana with options!
2015 Range Rover 4.4 SDV8 Autobiography, Indus Silver, Black Pack
Gone:Disco 4 HSE Luxury, Firenze Red, Ebony/Ivory
Gone:2006 FFRR TD6 Autobiography, Black
Gone: 2013 Jaguar XKR Convertible, Italian Racing Red😢
Gone: 2008 Disco 3 HSE, Hybrid Tv + Retro-fit RSE System & DVD
Gone: 2010 FFRR TDV8 Vogue SE, RSE & DVD, Stornoway Grey
16th Apr 2020 4:56 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
Nice. I've got a NS rear door to change. Got the new one ready, just haven't got around to it yet.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
16th Apr 2020 5:49 pm
ianm27
Member Since: 02 Jun 2016
Location: Hertfordshire
Posts: 2154
Cracking job Ajay and a really good looking D4 Uncle Ray's spare wheel protector
Limo Tint
Blackvue front & rear dashcam
Cruise control switch pack
Bodsy's remote for FBH
16th Apr 2020 6:13 pm
Asa
Member Since: 03 Jul 2016
Location: Essex
Posts: 172
That colour is stunning on the D4! Well done!
17th Apr 2020 7:03 pm
knwatkins
Member Since: 19 Sep 2018
Location: Poole, Dorset
Posts: 716
As above, great job and lovely D4 Kev
MY2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
MY2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey
17th Apr 2020 10:42 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806
There's a silver nut to undo on the bottom of the top hinge and another on the top of the bottom hinge. Then undo the two black bolts that connect the door restrictor to the car and then lift the door off. It's easier with two people and I had to use some silicon spray to loosen things a bit as at first it wouldn't budge! I found it a lot easier to remove the rectangular rubber cover for the wiring loom, then the plastic cover and disconnect the two plugs after the door had been lifted off its hinges but the door needs supporting underneath as the play in the loom isn't that great to allow the door to rest on the ground.. The two plugs are just inside the car skin and NOT the door. You don't need to remove any panels in the footwell.
The four bolts to remove are circled in black
Andy.2022MY Defender 110 D250 HSE X Dynamic, Gondwana with options!
2015 Range Rover 4.4 SDV8 Autobiography, Indus Silver, Black Pack
Gone:Disco 4 HSE Luxury, Firenze Red, Ebony/Ivory
Gone:2006 FFRR TD6 Autobiography, Black
Gone: 2013 Jaguar XKR Convertible, Italian Racing Red😢
Gone: 2008 Disco 3 HSE, Hybrid Tv + Retro-fit RSE System & DVD
Gone: 2010 FFRR TDV8 Vogue SE, RSE & DVD, Stornoway Grey
18th Apr 2020 3:35 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1806
Member Since: 22 Jun 2011
Location: southampton
Posts: 2477
Great result !last year one of my guys reversed one of our vans into the corner of a skip ! plumb in the middle of both rear doors .insurance guys quoted 2k with a 750 excess (he was young) found a pair on eBay £150 polish spray shop opposite sprayed and fitted for £100 cash £50 signwriting ..job done and no claim ! Very happy......
That was till it got written off as the meat in a 3 vehicle smash last month MY05 SE D3 Manual my first LR what a car
MY10 HSE D4 auto
MY14 XXV more buttons than the spaceshuttle
19th Apr 2020 9:36 am
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Member Since: 07 Oct 2019
Location: London
Posts: 1
Ajay(UK) wrote:
Getting the door off was one of the easier bits
There's a silver nut to undo on the bottom of the top hinge and another on the top of the bottom hinge. Then undo the two black bolts that connect the door restrictor to the car and then lift the door off. It's easier with two people and I had to use some silicon spray to loosen things a bit as at first it wouldn't budge! I found it a lot easier to remove the rectangular rubber cover for the wiring loom, then the plastic cover and disconnect the two plugs after the door had been lifted off its hinges but the door needs supporting underneath as the play in the loom isn't that great to allow the door to rest on the ground.. The two plugs are just inside the car skin and NOT the door. You don't need to remove any panels in the footwell.
The four bolts to remove are circled in black
Andy.
Thanks for this explanation! I 've searched for videos on complete door removal and couldn't find one. I was concerned that the door hinges might be like tapper bearings and hellish to pull off. Seems you had some problem at first but that just needed some silicon spray to minimise friction. So I feel more confident now of replacing a door that has a dint. I have the replacement door (OS passenger) arrived by courier 2 days ago and it also needs up-grading with my sound system features. It didn't have the inner panel but has window and lock. I hope they are OK but they seem to look in a new state. Cross that bridge I guess once I fit the door and my interior panel. I notice lots of videos on fixing faulty locks. At least I have my original parts and they are functioning fine. Might be an idea to keep those parts anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
and a really good looking D4 
