Member Since: 24 Apr 2017
Location: Fermanagh
Posts: 39
Fuel Burning Heater woes
Fuel Burning Heater
Help please,
FBH not being recognised by Webasto program
Fuses are OK
appears to be voltage from the power plug to fbh
using a vag connector and a harness bought from the shop
blue wire from harness inserted into 8 pin plug position 5
Webasto Software appears to connect to the vag but i cant get the software to talk to the FBH
Do i need a new FBH or can i service the one in the D3 at the moment
at my wits end
thanks
Roger
5th Mar 2018 8:43 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
You would seriously help others to help you if you bothered listing which vehicle, what year etc.
Presuming it's a Discovery TDV6, you won't speak to the FBH unless you have your K-Bus wire connected to pin 2. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
5th Mar 2018 8:49 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
OP does mention he has one of my diagnostic looms
Roger have you been through the entire setup guide in the wiki - link is on the paper tag on the loom?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
5th Mar 2018 9:41 pm
Beaver12
Member Since: 24 Apr 2017
Location: Fermanagh
Posts: 39
FBH not working
Hi Guys,
Landrover discovery 3 TDV6 2.7 XS 2008
please explain the connection K bus wire connected to pin 2
I have followed the instructions Setting up the ports as well as any other info that i can find on this site
thanks for the help
Roger
5th Mar 2018 10:49 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Your FBH will look like this:
My earlier model D3 looks like this:
You need to put a wire into pin 2, having a wire inserted into pin 5 won't work. My photo shows a red wire in pin 2, you need to do the same. Early models had the red wire installed in pin 2, later models don't have it.
Once you've fitted the command wire, connect your K-Bus ( Pin 7 out of your OBD adaptor ) to pin 2 on the fbh.
Then it'll work.
Follow the "Fitting the control wire" instructions here: https://www.disco3.co.uk/wiki/Fuel_Burning_HeaterMods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
5th Mar 2018 11:01 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Er, again, Beaver12 says he has one of my looms, which doesn't require this manual fitting of the pin 2 WBUS wire.
Beaver12, have you had any sign of life from your FBH - attempted start or smoke at all?
Check the 2 pin power connector is fitted, and check the fuse for the FBH (28 in the engine bay):
Member Since: 24 Apr 2017
Location: Fermanagh
Posts: 39
FBH not working
Hi,
Thanks for the reply's
There has been no sign of life from my FBH i have checked all the connections and they appear secure
12v+ coming out of the power connector.
anything else i can check? i have the store bought harness and presume that no other mods need to be done except blue wire into pin 5
thanks roger
6th Mar 2018 10:01 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
What COM port number are you using in WTT?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
6th Mar 2018 10:02 am
Beaver12
Member Since: 24 Apr 2017
Location: Fermanagh
Posts: 39
com ports
hi again,
I have tried various com ports but i think that the default port is 5
thanks
Roger
6th Mar 2018 10:12 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Make sure the COM port used in WTT matches that set up in Device Manager.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
6th Mar 2018 10:30 am
Beaver12
Member Since: 24 Apr 2017
Location: Fermanagh
Posts: 39
FBH not working
Hi, again thanks for the reply,
yes both ports are the same
thanks
Roger
6th Mar 2018 10:39 am
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Sorry if I misled you Beaver, I didn't know the shop bought lead already had all connections made. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
6th Mar 2018 8:11 pm
Beaver12
Member Since: 24 Apr 2017
Location: Fermanagh
Posts: 39
FBH
Thanks for your support i has a brief moment of hope
Still can’t get the thing to work
All the best
Roger
6th Mar 2018 8:25 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Right, back to the beginning.
Which version of the software are you using?
What is it doing when you say it "won't connect" - any errors/activity at all?
Martin06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
6th Mar 2018 11:01 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Found this, might help:
Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
