Member Since: 31 Dec 2018
Location: Brittany
Posts: 99
Fuse 31 in glove box keeps blowing when trailer plugged in
Hi all, MY2011 HSE D4 keeps blowing the ‘Trailer side lights’ fuse whenever any light board is plugged in, LED or incandescent bulbs. The car has a 13 pin socket fitted.
Trailer Indicators, fog and brake lights work on all combinations. No tail lights, number plate lights or front trailer running lights.
I have tried both my trailers, 1 LED and 1 incandescent, an LED trailer board from a friend, and an incandescent trailer board from a friend.
All these work on both friends vehicles, but all have the same issue on mine.
These were a combination of 13 pin plugs and 7 pin plugs going through an adaptor.
Has anyone come across a common issue with wiring or connections for the trailer side lights that could help me narrow things down a bit.
I believe all the lights worked about 4 years ago, but have not done any towing since then, and now this issue.
All help, fault finding tips, guidance and photos greatly appreciated.
20th Jun 2024 1:42 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Hi
I wonder if a wire has frayed causing a short, might be worth unplugging the tow loom and checking for any bad wires, also ensuring the pins arnt bad , bent or any corrosion over the years
Within the plug or loom itself
Hope that helps
20th Jun 2024 2:15 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Plus just double checked and it say for fuse 31 is
Member Since: 31 Dec 2018
Location: Brittany
Posts: 99
Sorry, bad day!
Fuse 27, 10amp.
20th Jun 2024 5:37 pm
Kitetraveller
Member Since: 31 Dec 2018
Location: Brittany
Posts: 99
Many thanks!
I can take the plug apart and check.
Any idea where the loom comes from/goes to please?
Cheers again👍
gstuart wrote:
Hi
I wonder if a wire has frayed causing a short, might be worth unplugging the tow loom and checking for any bad wires, also ensuring the pins arnt bad , bent or any corrosion over the years
Within the plug or loom itself
Hope that helps
20th Jun 2024 5:38 pm
Jamiehol
Member Since: 13 Nov 2015
Location: Ipswich
Posts: 394
The towing loom comes out of the car behind the rear light on the passenger side on a UK car then runs along the back of the bumper.
The genuine LR looms are in two parts with the connectors just below the rear light on the outside.
20th Jun 2024 6:24 pm
Kitetraveller
Member Since: 31 Dec 2018
Location: Brittany
Posts: 99
Thank you, thats really helpful👍👍
20th Jun 2024 9:36 pm
itsaguything
Member Since: 20 Dec 2023
Location: Manotick, On
Posts: 266
and with the connections precariously close to the mounting and storing of the tow hitch, are you certain nothing has been damaged?
Cheers2015 LR4 HSE Lux Aintree Green
2013 LR2 HSE Radiance Red
2007 XKR Jaguar Racing Green
2005 XJR Jaguar Racing Green
2002 S-Type R British Racing Green
22nd Jun 2024 1:52 pm
Kitetraveller
Member Since: 31 Dec 2018
Location: Brittany
Posts: 99
Ah, now then, I need to go and have a look.
The tow hook has been installed for the past 6 years, so not likely to be a recent damage, but I do have jump leads and other bits rattling around in there, so well worth a look👍
Thankmyou for the suggestion.
Cheers.
22nd Jun 2024 4:59 pm
itsaguything
Member Since: 20 Dec 2023
Location: Manotick, On
Posts: 266
cheers!2015 LR4 HSE Lux Aintree Green
2013 LR2 HSE Radiance Red
2007 XKR Jaguar Racing Green
2005 XJR Jaguar Racing Green
2002 S-Type R British Racing Green
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
