2-pin connector for Freelander 2 number plate light. I'd ask on Freel2 but there seems to be a..... slight lack of technical expertise over there. I'm after the corresponding plug for this connector.
Click image to enlarge
The head who owned this FL2 before me has somehow decided to cut away the number plate light connector on the loom and then butchered the surround on the lights, before soldering the cables direct to the board. In doing so he also broke the clip that holds the lamp in place.
Amusingly, he claimed to be an electrician.
I've got replacement lamps from PowerfulUK as noticed the light was loose, but hadn't realised the extend of his ham-fistedness until I went to replace the lamp just now. Good thing I got the car cheap!I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
23rd Dec 2021 3:42 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
Wonder if it’s YPC911650 ??
Last edited by gstuart on 23rd Dec 2021 4:28 pm. Edited 2 times in total
23rd Dec 2021 4:24 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563
I've got those connectors Al, but they are common to the D3/D4/RRS1 etc as well
Click image to enlarge
Seeing it might help - e.g. if you happen to have an old rear handle loom from a D3 as there will be two on there.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
23rd Dec 2021 4:25 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
Nice! As it happens I think I have got an old D3 handle kicking around. I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
23rd Dec 2021 6:16 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563
Haven't we all? 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
head who owned this FL2 before me has somehow decided to cut away the number plate light connector on the loom and then butchered the surround on the lights, before soldering the cables direct to the board. In doing so he also broke the clip that holds the lamp in place.
,
