Member Since: 13 Aug 2017
Location: São Paulo
Posts: 9
IID Tool BT on L538 (Evoque) Ingenium Petrol
Hi,
I use IID Tool for several year on my D3 and it is fantastic.
Now i bought an Evoque (L538) with Ingenium Petrol engine and i'm unable to connect with IID Tool.
When i try to connect i get "No connection with High Speed CAN".
My IID Tool is updated with firmware 3.0.
Is IID Tool compatible with my car ? In IID Tool support page it says it is, but i'm not being able to connect it.
Thanks !
27th Feb 2023 5:32 pm
Breg90
Member Since: 04 Feb 2017
Location: Falkirk
Posts: 360
Interested as I am picking up a epace next week and wondering if my gap tool will work.
It might be worth checking what version of the tool you have. I think a gen 2 will not work, the gem 3 might?Series one 1949 - in bits, chassis is strapped to the ceiling in my garage (beside the canoe)
LR 90 - In bits
Disco 3 - currently in bits
27th Feb 2023 5:38 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6415
no conn to high speed can only means your tool is not properly touching all the pins on OBD port
try to connect not pushing it all the way and check the pins if they are thinner than normal or damaged or bents in any way
I had the same but not pushing IDTool all the way into the connector does the job
Greg
27th Feb 2023 6:57 pm
ujensen
Member Since: 13 Aug 2017
Location: São Paulo
Posts: 9
I tried connecting again, not completely, completely, many ways, even with an extension cable, no lucky. Now its saying "No connection to high speed CAN" and "Noconnection to medium speed CAN". Strange that i tried OBDLink MX i have and it connects fine for basic readings.
28th Feb 2023 2:21 pm
ujensen
Member Since: 13 Aug 2017
Location: São Paulo
Posts: 9
Breg90 wrote:
Interested as I am picking up a epace next week and wondering if my gap tool will work.
It might be worth checking what version of the tool you have. I think a gen 2 will not work, the gem 3 might?
I have the first BT unit, i thing is G2. But support pages says its compatible.
I’m sure they said the G3 would be required for the newer post 2017 vehicles. Not the G2.____
Gone: 10MY L320 RR Sport HSE, Ipanema Sand
Gone: 20MY Jaguar iPace HSE, Silicon Silver
Gone: 17MY RR Evoque SE Tech, Loire Blue
Gone: 08MY Discovery 3 XS, Stornoway Grey
Gone: 07MY FFRR TDV8 Vogue, Stornoway Grey
Yes it is, all L319’s are covered
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum