Member Since: 01 Feb 2008
Location: France
Posts: 5
install Altox WBUS-5 ?
Hi
I just purchased a
Altox WBUS-5 GPS for webasto (from Altox-Europe)
I'm from France
I wonder how to install the altox device on my RRS 2008 ( Same as Disco 3 I guess)
* connector and wires provided with altox device :
- red --> 12V Battery ?
- Black --> Ground ?
- Blue --> connected on the webasto connector ? which location on the webasto connector ? Shall I cut and soldered with another existing wire on the webasto connector ?
Click image to enlarge
Click image to enlarge
I don't want the temperature sensor and the button to switch on the module inside the vehicle, so I suppose i don't need to use the green, white and yellow wires (on the altox connector)
Am I right ?
Any mistake ?
Thanks for your help
Frantz
7th Dec 2017 5:47 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Here you are
Blu Altox cable (W-BUS) on pin 2 Webasto connector
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum