Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > IIDTool Help

Which live value to monitor in IID tool? (boost)
Post Reply  Down to end
Page 1 of 1
mek
 


Member Since: 18 Mar 2015
Location: Zurich
Posts: 470

Switzerland 2006 Discovery 3 TDV6 Base 5 Seat Manual Tonga GreenDiscovery 3
Which live value to monitor in IID tool? (boost)

Hi,

I have a thread I started here about a whine/screech/squirrely sound that happens 1800-200RPM on a steep hill.

https://www.disco3.co.uk/forum/screeching-...78211.html


I've just changed my aux belt stuff and same noise so I would like to see if I can flag this as:

1. Mechanical (PS pump, water pump, diff or other); or
2. Boost- related (crossover pipe, turbo pipes, intercooler etc)

What can I monitor in my BT IID to help me put this into one of these categories? I was experimenting the other night but was slightly overwhelmed by the settings. manifold temp/pressure, boost 1 or 2 etc . Also any advice on logging would be appreciated. I tried to capture some output but it just looks like flat lines when I try to access.

Thanks,


Andy  
Post #201999418th Jan 2019 11:14 pm
View user's profile Send private message View poster's gallery Reply with quote
lynalldiscovery
 


Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274

United Kingdom 2006 Discovery 3 TDV6 Metropolis LE Auto Bonatti GreyDiscovery 3

If its not black smoking as the noise is happening, you will most likely find the boost pressure is near enough correct.
What you have to bear in mind as its a screech its going to be a small leak, a bit like us when we whistle.

As the engine breather is routed into the engine air intake side of the system, if its a leak on the cold pressure side (from turbo to inlet manifold) there will almost certainly be a small tell tale sweat/misting of oil with dirt stuck to it.

If on the other hand its on the exhaust side (cyl head to the turbo) thats going to be a lot harder to find. Have you searched for the link pipe that joins RH bank to the LH bank? as these can split.  
Post #201999919th Jan 2019 12:32 am
View user's profile Send private message View poster's gallery Reply with quote
mek
 


Member Since: 18 Mar 2015
Location: Zurich
Posts: 470

Switzerland 2006 Discovery 3 TDV6 Base 5 Seat Manual Tonga GreenDiscovery 3

Many thanks for your reply. Having had the gearbox out to change clutch 2 weeks ago I am trying not to think about the crossover pipe. That may well turn out to be a lesson in making the assumption the noise was the aux belt. (I had the noise prior, and replaced all brackets)

It feels like you would err on the side of this being a boost issue?  
Post #202000419th Jan 2019 7:46 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10734

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

If performance is ok I don’t think the iid can help with noises.  
Post #202003719th Jan 2019 9:24 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site