Always. Yet somehow I manage to post over 6000 entries on here I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
Folks, if you can tell me what size you want,what head configuration ie M10 x 40 hex flange, and the material grade - have a look on the head, they will say 8.8 or 10.9
and I will check them out, we currently coat about 3,000 tons of fasteners per week in one or our sister companies in anti rust coatings (Zinc flake or zinc plate) I am sure I can find a enough to keep you all happy.
I guess the fastener with the plate are in zinc and clear or zinc and yellow pasivate, this coating is cheap and gives fairly low corrosion protection, The coating we put on will be far superior if I say so myself.
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
24th Oct 2008 10:08 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
I slapped loads of grease on me nuts when I fitted mine a while back
Spent most of our time flying kites and digging holes, then went for a quick hoon, when the coastguards had gone the other way "To finish first, one first has to finish ...."
24th Oct 2008 10:17 pm
TazDaz
Member Since: 07 May 2007
Location: South East Essex
Posts: 2858
NoDo$h wrote:
And that book i promised John; I need to get that to him on Tuesday.
cheers Alan
25th Oct 2008 8:39 am
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15214
AndrewS wrote:
j,moore wrote:
heres a tip for such things, use stainless bolts. they last forever
As long as they don't 'Lock up' Stainless is not as forgiving as Mild Steel when they lock you will never undo them
A smear of copper slip will work wonders
So it would appear that standard steel bolts with copperslip would be best?
Do we agree........?
25th Oct 2008 8:58 am
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15214
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15214
25th Oct 2008 5:53 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
shiny moose wrote:
Folks, if you can tell me what size you want,what head configuration ie M10 x 40 hex flange, and the material grade - have a look on the head, they will say 8.8 or 10.9
and I will check them out, we currently coat about 3,000 tons of fasteners per week in one or our sister companies in anti rust coatings (Zinc flake or zinc plate) I am sure I can find a enough to keep you all happy.
I guess the fastener with the plate are in zinc and clear or zinc and yellow pasivate, this coating is cheap and gives fairly low corrosion protection, The coating we put on will be far superior if I say so myself.
Moose, I have all of mine off the car at the minute. If you PM me your address & I'll post them out to you if that's OK?
The threads on at least one are pretty knackered after taking it off.
Mr moose, you are a stones throw from me, and I have 3 knackered nuts and bolts sitting in my tool box - if it would save postage and you are passing feel free to drop by, kettle always on "To finish first, one first has to finish ...."
Your Jack Adaptor is also sitting on my bench.
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum