Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 14232
MOT EGR Farce.
My daughter's D3 failed its MOT because of the EGR blanks! The MOT tester noticed the thickness of the EGR blanks under the pipework and concluded that the EGR system was not functioning. To confirm this he removed the cover on the engine and saw that the pipes were not connected. So it failed.
I have hade to buy a set of EGR pipes to connect up to the throttle body and make a thin blanking plate to get it through the MOT even though the MOT tester knows it's still not functioning! It just has to look right! Absolutely ridiculous.
Click image to enlarge
Made a new blank
Click image to enlarge
One side done!New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
This is the reason why, when I blanked all the D3's over the years I always put the pipes back to make it look like it had not been touched. Also those blanks are on the thick side.
Flack
5th Jul 2024 9:55 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10592
I didn't think they had to remove covers. So he was really was going out of this way!
5th Jul 2024 10:09 am
Moo D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 14232
They don't but can if they suspect something is a miss.
Odd thing is it passed last year at the same MOT station but different tester.New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
5th Jul 2024 12:01 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13908
Hi Moo
Hope ur good mate
Likewise in using the thin blanking plaste down by the engine block along with leaving the egr pipes in situ , think I sprayed them blank to hide them even more
Hope u don’t mind me adding but had a pressure DTC error , for the life of me can’t remember and found after removing the throttle body and blanked off the ports , I pumped some air in and bubble tested it at the pipe connections
Found leaks on both sides, resolved the leaks and issue went way ,mess back being very responsive
Assume the tester will be looking out for this more on discoveries
Before I forget I also fitted a D4 genuine Map sensor as it had a larger hole so helped reduce/ stop the map sensor from blocking up , along with fitting new large O rings , using some plumbers clear silicone grease on re installation , along with of course removing the old throttle body flap
Convinced the D4 map sensor made the engine more responsive but think that’s just me As always hope none of this comes across in trying to teach u how to suck eggs
Hope it’s useful and all goes well mate
Click image to enlarge
Click image to enlarge
Click image to enlarge
5th Jul 2024 4:29 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 14232
Thanks for the heads up but all is good. Everything installed as it should be but still blanked.
Re test Monday. 🙏
Click image to enlarge
New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
5th Jul 2024 6:02 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13908
That’s great and good luck for Monday mate
5th Jul 2024 6:07 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 14232
Cheers. New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
5th Jul 2024 8:01 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1252
Didn’t think they were allowed to remove the covers to be honest. When I blanked mine I only
Blanked the lower end by the Egr itself left the top as is. Good luck seeing them 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
6th Jul 2024 1:05 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 14232
They are allowed to if they have reasonable grounds to check something. The EGR blanking plates on the bottom of the pipes were vey thick so he could see they were blanked. It was because of this he needed to verify the system so took the cover off.
Anyway, all sorted, although I've head that testers are getting more stringent, particularly those due an inspection.New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
6th Jul 2024 2:08 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8163
Mine failed on front lower arm bushes when new arms had been fitted 3 months earlier by LR main agent, took it to another MOT tester same afternoon and it passed, no mention of bushes. that was 5 years ago and still on same arms.
Do the same as me take it elsewhere.It can when others can't,
It will when others won't,
It goes where others don't.
7th Jul 2024 8:47 am
UNG
Member Since: 20 Jun 2008
Location: Lancs
Posts: 763
Moo wrote:
They are allowed to if they have reasonable grounds to check something. The EGR blanking plates on the bottom of the pipes were vey thick so he could see they were blanked. It was because of this he needed to verify the system so took the cover off.
It is unusual for an MOT tester to remove any cover as if they break it or cause any damage they are liable for the repair or replacement, generally if something is suspect they may place an advisory on it
Moo wrote:
Anyway, all sorted, although I've head that testers are getting more stringent, particularly those due an inspection.
A lot of testers have their pet hit list, one MOT test station near me is noted for advisories or fails on brake pipes when the have the slightest corrosion on them, another place goes for suspension and steering bushes the place I have been using for many years got a new tester and he had a habit of using a long pry bar on suspension bushes tried to fail my vehicle once on the wishbone bushes that had only been fitted 3 weeks prior to the test when pulled up on it he said they must be of faulty manufacture I pointed out that the load it put through them with the bar was many times the weight of the vehicle and he could of caused damage to them mentioned it to the guy who owns the place a few weeks later when I was back there with another vehicle and he said that tester no longer worked there"Never keep up with the Joneses. Drag'em down to your level. It's cheaper".
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum