Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
Nanocom Evo Upgrade V1.30
Hi all,
We have been working away at what turned out to be quite a large release, packed with features and upgrades, including:
Recovery "ECU Programming" function for "bricked" ECU's during failed flash attempts.
A "Save all" option added to the ECU info page as requested by many users.
Discovery 3 & RR Sport 05-09 - Added "Injector Cylinder Balancing" function.
Discovery 4 & RR Sport 2010+ - Key Learning function, battery rest, ACC calibration added, 10 more ECU's available for flashing and more.
There is a lot more to the release, full details of which can be found in the release notes here.
And as always, any and all feedback and suggestions are welcome.
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
Re: Nanocom Evo Upgrade V1.30
karpouzih wrote:
Hi all,
We have been working away at what turned out to be quite a large release, packed with features and upgrades, including:
Recovery "ECU Programming" function for "bricked" ECU's during failed flash attempts.
A "Save all" option added to the ECU info page as requested by many users.
Discovery 3 & RR Sport 05-09 - Added "Injector Cylinder Balancing" function.
Discovery 4 & RR Sport 2010+ - Key Learning function, battery rest, ACC calibration added, 10 more ECU's available for flashing and more.
There is a lot more to the release, full details of which can be found in the release notes here.
And as always, any and all feedback and suggestions are welcome.
Thanks
Chris
Magic stuff Chris - another job for the weekend then
Steve
18th Sep 2015 8:21 am
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
I'll update mine this evening.
18th Sep 2015 8:23 am
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
Hi Robbie,
Thanks for reply. We will continue to add functionality, a new adaptive category, vehicle resets, and add more calibration functions. Might even create separate sections for it so its all grouped up. Its very much dynamic and dependent on feedback. Then there are of-course the newer vehicles which we're working on.
The news page always carries the release notes. (Long week )
All additions are also quite quickly incorporated into the Emulator so people can get a very realistic feel as to what the Nanocom can do. The emulator is available on the Nanocom main webpage here, or as a direct link here.
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Just updated mine Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
18th Sep 2015 11:10 am
Barn1e D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
Chris, I like the how to videos, might convince me to give mine a flash. 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
18th Sep 2015 12:17 pm
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
Member Since: 04 Dec 2011
Location: Buskeud
Posts: 681
Anything new for the Msv-2 users?
Mr.P
22nd Sep 2015 3:58 pm
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
Hi Mr. P,
Were currently finishing off the D4 key learn for the MSV systems and any additional functionality that has been added to the Nanocom that may not be on the MSV. However the MSV does have most of it already.
I have not updated my unit since I acquired it ..... the question is can this performed on a mac rather than a windows PC ?????
Anyone ?
7th Oct 2015 8:00 am
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
Hi Simoniz,
The Nanocom updater was designed to be use with Windows based systems but we have had quite a few customers who have reported using an emulator on a MAC to perform the upgrade with no problems. So the answer is yes, but not directly. Some more info for you here:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
