Member Since: 24 Dec 2023
Location: powys
Posts: 344
nearly mot fail. advisory help
just took the disco for mot. everything 100 %
best example he has seen in years.
1 advisory
rear upper suspension bush
easy job ? ant tips on parts or tools needed
thank youhad a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
7th Sep 2024 11:17 am
ronald.soak
Member Since: 29 Apr 2008
Location: London
Posts: 534
Tip: try search on here.
7th Sep 2024 1:28 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 344
tried, but dont know what its calledhad a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
7th Sep 2024 1:39 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
Depending how bad the bushes are, it might be worth changing the arm completely, especially if it's all original. It can be a pig of a job if the bolts are rusted up.
If it's just an advisory, it'll probably be ok for quite a while.
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
7th Sep 2024 4:31 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
Mine failed on fronts 5years ago 6 months after new ones had been fitted by main LR agent, took it to another MOT tester in the afternoon it past with no mention about bushes, I'm still on the same bushes.
Moral of this story is get it checked elsewhere before changing them or check it yourself. It can when others can't,
It will when others won't,
It goes where others don't.
7th Sep 2024 6:36 pm
Bicycle repairman
Member Since: 18 Sep 2019
Location: Cumbria
Posts: 188
The bush in hub is easy special tool needed BIG hammer for removal and really a bearing puller for install failing that big socket x 2, bit of flat plate and big G clamp.D4 GS let the retro fit begin
Heated steering wheel
Aftermarket TPMS
Double Din head unit satnav and TV
Reverse Camera
Cubby fridge
Door panel upgrade
Mood lighting
Digital Dash personalised
Back lit sun visors
4.5 Facelift front, rear and memory mirrors
Stainless bumper tread plate
6 pot Brembo conversion
HSE heated memory seats
Retro fit auto lights and wipers
LR 663 Defender alloys
275 45 20 GG AT3s
quarter of a D3
7th Sep 2024 10:00 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 344
skunk38 wrote:
Depending how bad the bushes are, it might be worth changing the arm completely, especially if it's all original. It can be a pig of a job if the bolts are rusted up.
If it's just an advisory, it'll probably be ok for quite a while.
Only very slight play.
I will just change the rose bushs
Looks like 1 of the site sponsors sell them and the tool
Tool is expensive though
How easy is the arm to change ?had a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
8th Sep 2024 7:32 am
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6771
Depends how long it’s been there. The bolts might be in the need of cutting.
8th Sep 2024 8:30 am
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 344
Got bolts and rose joints in my basket at advanced factors from here
Will change both sides
Don't know were to get a removal tool and installer.
Any one recommend one or know we're they arr for sale
Cheershad a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
8th Sep 2024 5:12 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4540
Much easier to just buy arms, unless you've got time to burn.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
8th Sep 2024 5:31 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
I bought this kit and it seems ok.
https://www.ebay.co.uk/itm/284354587584Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
8th Sep 2024 5:34 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 344
rrhool wrote:
Much easier to just buy arms, unless you've got time to burn.
It's the rose joints in the hub carrier not the control arm bushs had a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
8th Sep 2024 5:38 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 344
Did you use it on the top bushs ?
And have you used it on anything else ?
Thank you for that had a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
8th Sep 2024 5:41 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6771
I replaced recently the rear knuckles on both sides with a britpart hub and bearing assembly that had everything new. On my vehicle the bearing and the upper bush needed replacement (both are failures during inspection) so it seemed like a good idea to just replace everything around there anyway rather than fiddle the bearing and bush out separately.
8th Sep 2024 5:45 pm
faulksy
Member Since: 24 Dec 2023
Location: powys
Posts: 344
Very good point.
All parts are ordered now.
Just need the tool to do it now had a d1 ,d2 a land mark d4 for 3 days now have awsome d4 in orkney grey hse sdv6 my12
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
tried, but dont know what its called
