PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
  
|
| Need some help on a cargo space measurement |
|
To anyone who can help me out.
I need a height measurement from the cargo space floor to just below the cargo blind (i.e. where the channel is moulded to retain the cargo blind) in centimetres or inches.
I want to buy a 12VDC fridge (like a 50lt Waeco) before I get my Disco3 and I don't want to buy one which is too tall and doesn't allow the cargo blind to close. Sometimes the fridges are on special and if I can find one on special between now and delivery of the Disco3 I'd get it to save a few $$  .
In Australia the Disco3 is only available for demo and I don't want to walk into a dealer with tape in hand and start measuring especially if the dealer isn't the one I bought the vehicle from. My dealer is not close by.
Thanks Chris
|
 21st Mar 2005 10:24 pm |
|
|
freeflytim
Member Since: 18 Feb 2005
Location: Chattanooga, TN
Posts: 297
  
|
| Re: Need some help on a cargo space measurement |
|
I think I know what you are asking…
Measuring from the carpet to the bottom of what I call the ‘you can’t see what’s back here rollup thingy’ is between 18-19 inches.
While I had my tape measure out, nothing bigger than 40 inches wide or 37 inches tall will go in.
If you can the cargo in, once past the rear hatch frame the inside will hold 40 inches top to bottom and 43 inches left to right. Of course these measurements are done on a whim and take that for what its worth!!!
-TIM
Tennessee USA
|
| 22nd Mar 2005 4:40 am |
|
|
PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
|
Thanks Tim,
The Waeco CF40 will fit as it's height is 17.5 inches (445mm). The CF50 is 18.7 inches (475mm) which is borderline if you measure 18-19 inches.
Regards,
Chris
|
| 22nd Mar 2005 5:23 am |
|
|
