| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
amazing
Member Since: 05 Mar 2011
Location: chengdu
Posts: 1542
  
|
| no drive after car sits for a week..for a bit anyway |
|
I have had many autos before but have noticed an oddness with this one.
Normally in the morn I start up the car, put on seat belt then pop it into drive and lift my foot of the brake so the car rolls forward about 2 metres (to allow the wife to get in as a pillar blocks the door).
After a holiday when I pop it into drive it does not move...I then pop it into neutral rev it a wee bit then pop into drive and it trundles forward...
why? It is better to have and not need it then need and not have it.
|
 2nd Mar 2014 11:11 am |
|
|
steveraspberry
Member Since: 18 Sep 2011
Location: Nr Sevenoaks,Kent
Posts: 2081
|
Possibly discs have a little bit of rust on them bind them lightly to the pads? The extra revs is ually enough to break the "seal". Does it make a noise like a small bang when it finally moves?
Best,
Steve  My17 Volvo XC90 Inscription
MY15 Mitsubishi L200 Barbarian
RGK Tiga Fx Wheelchair,
Large Alsation called Abbs 
Medium blue Staffie called Piglet
Medium Alsation called Bailey
|
| 2nd Mar 2014 11:22 am |
|
|
bammmy
Member Since: 12 Jan 2013
Location: Manchester
Posts: 138
|
Sounds about right to me.
|
| 2nd Mar 2014 11:51 am |
|
|
amazing
Member Since: 05 Mar 2011
Location: chengdu
Posts: 1542
|
not convinced on the discs no noise at all, but after our next holiday I will try pushing car first...feels more a lack of torque converter. It is better to have and not need it then need and not have it.
|
| 2nd Mar 2014 11:59 am |
|
|
steveraspberry
Member Since: 18 Sep 2011
Location: Nr Sevenoaks,Kent
Posts: 2081
|
Next time try just revs whilst it's in gear and see if moves then? Might not hear a noise but if you feel a small lurch then I'd be reasonably sure that it's the disc rust thing which is usual if left for a while.
Hope it's not a torque converter issue, unless it's under warranty of course?
Best,
Steve My17 Volvo XC90 Inscription
MY15 Mitsubishi L200 Barbarian
RGK Tiga Fx Wheelchair,
Large Alsation called Abbs
Medium blue Staffie called Piglet
Medium Alsation called Bailey
|
| 2nd Mar 2014 12:10 pm |
|
|
LetsDisco
Member Since: 04 Jan 2010
Location: Letsitele
Posts: 26
 
|
My 2011 sdv6 hse (6spd) does exactly the same thing. Defenitely no rust on discs. The car just stands and idle in "d" and only starts moving when i press the accelerator.
92000km on the clock. Once it is warm i dont experience this problem. My cars stands for anything from a day to 7 days between drives.
Cant it be something witht the new zf on d4 that maybe has less moving from torq converter alone (no acceleration) to help with fuel saving while in d and idleing.
I'm not to technically minded - so sorry if it is a stupid idea 11 Disco 4 SDV6 HSE
19" Road tyres
40l Engel
Previously:
09 Disco 3 tdv6 se
05 Disco 3 tdv6 se
00 Disco 2 td5 es
Disco 2 GS V8 Auto
|
| 9th Mar 2014 1:38 pm |
|
|
LetsDisco
Member Since: 04 Jan 2010
Location: Letsitele
Posts: 26
|
As a matter of fact i'm not sure if my cars moves or not in d if it has warmed up....
I only notice no movement when i start it in the garage as it is a tight fit and need to look before reversing (eish, another fact that i only notice now - the car is not in "D" but "R"!!!!) 11 Disco 4 SDV6 HSE
19" Road tyres
40l Engel
Previously:
09 Disco 3 tdv6 se
05 Disco 3 tdv6 se
00 Disco 2 td5 es
Disco 2 GS V8 Auto
|
| 9th Mar 2014 1:42 pm |
|
|
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2862
 
|
Sounds more like Torque convertor related than discs to me - how many miles/km has the vehicle done?
My gearbox varied in pickup depending on whether it was cold or warmed (but that may have been because of other issues  ) Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
|
| 9th Mar 2014 1:53 pm |
|
|
F355GTS
Member Since: 10 Nov 2008
Location: North Hampshire
Posts: 849
|
My BMW 5 series with 8 speed box does this after standing for a week, a few revs and it gets moving Mark
|
| 9th Mar 2014 2:59 pm |
|
|
promitheus
Member Since: 04 Jul 2009
Location: Afidnes, Greece
Posts: 570
 
|
Are you sure you had your seatbelt on? If you didn't then the EPB does not come off automatically, you have to disengage it manually.
|
| 9th Mar 2014 8:24 pm |
|
|
amazing
Member Since: 05 Mar 2011
Location: chengdu
Posts: 1542
|
mines only done 37000km
yes seat belt on
its in on thurs to sort screen so will ask to check gearbox oil level.
If they can It is better to have and not need it then need and not have it.
|
| 10th Mar 2014 2:31 am |
|
|
promitheus
Member Since: 04 Jul 2009
Location: Afidnes, Greece
Posts: 570
|
Sorry to say , it's door open that doesn't let the EPB disengage.  It seems that my seatbelt issue has overridden any other thoughts of mine.  Please replace seatbelt on with door firmly closed in my previous post.
|
| 10th Mar 2014 11:44 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
