New Bridges
Member Since: 08 May 2008
Location: South West
Posts: 5
|
I have a Nokia CK 100 Bluetooth kit and the additional leads to fit, when all connected up I cannot get the speakers to run the phone and the stereo does not mute. Someone told me I should be connecting under the drivers seat on the amp and not at the back of the head unit. Any advice would be useful. Its a 2005 SE with Harmon Kardon Stereo. "Hold Fast"
|
29th Jul 2009 4:44 pm |
|
|
StuA
Member Since: 19 Apr 2009
Location: Derby
Posts: 39
|
No that is not correct. With the Autoleads connector on a Harmon Kardon system you need to connect into the back of the head unit. This will give you telephone out the speakers and audio mute. The instructions with the Autoleads connector shows you what to do, but basically you add three pins into an existing connector to the head unit. Discovery 3 2.7 V6 TDi | Manual | S spec | Zermatt Silver | 2006 | 20% tints to rear | Audio Connectivity Module | Nokia CK-15W car kit | | Xenons | Disco 4 LED rear lights
|
30th Jul 2009 7:32 pm |
|
|