Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1282
[Not Required] EGR Pipes into Throttle Body - MOT Failure
I blanked my EGR valves many many years ago and never had a problem with MOT's. Unfortunately we have a new MOT inspector and he noticed straight away my EGR pipes were missing, so the D3 has failed MOT.
I still have the EGR pipes from the EGR valve to the throttle body, but I've seem to have mislaid the pipes that sit within the throttle body that these pipes connect to. I will still have these blanked, but need to be visible. Just to note I did have the engine cover on, but he still spotted they were removed.
Has anybody got some kicking around?
EDIT: This is for a 2006 D3, TDV6, 2.7.
Thanks
John
Last edited by John P on 24th Apr 2024 4:55 pm. Edited 1 time in total
29th Feb 2024 5:12 pm
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1282
Pipes required:-
Click image to enlarge
29th Feb 2024 5:25 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20838
You won't need those bits
Just fit the pipes for the EGR back in place ontop of the blanking plates. Engine cover on, job done My D3 Build Thread
Member Since: 23 Jun 2006
Location: W.London.
Posts: 2344
If he did remove your engine cover, he must have taken the oil filler cap off. All kinds of sh*t could have entered your engine Because he won’t have taken the care that you or I would, in removing any grit and debris from the recess, before removing the cover. If he did actually do this, it’s just NOT acceptable, he is tampering beyond his station, I think this guy may need to be reported, personally.D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Because he won’t have taken the care that you or I would, in removing any grit and debris from the recess, before removing the cover. If he did actually do this, it’s just NOT acceptable, he is tampering beyond his station, I think this guy may need to be reported, personally.
