| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Lemonjelly
Member Since: 04 Jul 2022
Location: CHORLEY
Posts: 6
  
|
| Parking sensor fault codes and rear sounder |
|
I've just bought a 2012 Disco 4 HSE, and I'm trying to get the front/rear parking sensors to work. I get a 3 sec beep from the front parking sensor at ignition, and the parking button blinks if I press it, along with these errors:
B1B57-11 (2F) Front sensors power circuit - General electrical failure - circuit short to ground
B1B58-11 (2F) Rear sensors power circuit - General electrical failure - circuit short to ground
As I've never heard the rear sounder I thought I'd start by replacing that. However when I've checked behind the passenger cargo trim (RHD), I can see where the sounder should go, but there isn't one, and also no connector / cabling for it.
I was hoping someone might know if that suggests it's been removed or if I'm looking in the wrong place? From looking elsewhere / videos it looks like I should have another couple of cables on the loom, but there aren't any and it doesn't look like it's been butchered (still has the wrapping etc).
Cheers
|
 4th Jul 2022 1:32 pm |
|
|
Lemonjelly
Member Since: 04 Jul 2022
Location: CHORLEY
Posts: 6
|
An update on this as I've fixed it thankfully.
I replaced all 4 rear sensors to start with, which changed the error code to problems with all 4 sensors. From looking on this forum that pointed to the loom, so I replaced that, and now everything works.
Based on that I assume there isn't a rear speaker fitted in later disco 4s - although there still is the space for it (but no cable).
Cheers
|
| 19th Jul 2022 6:23 pm |
|
|
swansty
Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 939
 
|
I have the same fault after changing a faulty rear sensor last week. Did you work out which loom it was? Front, rear or both? I have exact same error codes. Checked each sensor with the IID but nothing untoward with them
Edit: unplugging rear sensor loom removed the fault code so that would point to the rear loom.
|
| 23rd Jan 2023 6:48 pm |
|
|
Lemonjelly
Member Since: 04 Jul 2022
Location: CHORLEY
Posts: 6
|
Yeah I replaced the rear loom - it was brittle when I switched the sensors so it made sense, and all good since
|
| 25th Jan 2023 10:22 pm |
|
|
peat729
Member Since: 12 May 2011
Location: Dorset
Posts: 4
|
Hi one and all, I am having the same issue. I would appreciate your help.
Had the camera not working message last week, changed the rear loom and 4 sensors, worked for 1st drive now have fault back.
Any thoughts
Thanks in advanced
|
| 6th Feb 2023 5:54 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
