Do you already have the CK3000 fitted? The leads you need depend on which audio system is fitted to your vehicle.Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
8th Mar 2009 11:29 am
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
The leads you require are again from Parrot, and its listed under Jaguar and not Landrover, it allows full integration of the steering controls for the kit. If the proper leads dont get used then the AMP could be damaged
Member Since: 23 May 2008
Location: Brisbane
Posts: 10
Thanks for the information, guys.
I haven't bought it yet. My ipod connects to the AUX so I don't need the new model. I've got a MY2008 SE with the standard radio.
Laurie
8th Mar 2009 12:33 pm
l_moro
Member Since: 23 May 2008
Location: Brisbane
Posts: 10
Do I actually need the MultiCOMM kit then. I have the audio controls + the phone switches. I fitted them after I bought the car. The audio control unit w1th the phone switches was only about $30 dearer.
I'd recommend the CK3100 over the CK3000 as it has a display, which can be mounted out the way on the front courtesy light panel. See the thread link on the second post above for pictures Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
For the hi-line stereos, you will need adapter leads as follows...
This one, 06-124B, (well, actually the half of it without the big box) which interfaces to the back of the stereo via the mute and phone inputs
http://www.siocommunications.co.uk/06-124B.html
If you choose a different Parrot, then just select the appropriate lead for your particular kit from the first three items on the list in the previous link. The 06-124B leads is common to any Parrot install.
To interface to the steering wheel controls you will need the following MultiCOMM, actually listed for the Jaguar X-type, and you will have to do some manual wiring to connect to the r-ladder bus, as described in ridgeback_moor's post above.
http://www.parrot.com/documents/en/support...jaguar.pdf
Member Since: 23 May 2008
Location: Brisbane
Posts: 10
Thanks Andy, those instructions are quite detailed. I think I will go with the ck3000. I'm just interested in installing a good bluetooth phone system and having the 2 switches on the steering wheel operational.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
The leads from Parrot worked WELL on my top of the range HK Logic 7 stereo. 
