Rmigel
Member Since: 22 Mar 2011
Location: Saint-Petersburg
Posts: 8
|
I have a problem with PDC button on my D3 2008 HSE.
The Park assist works well. I hear sound when closing up on obstacles and PDC button lights continuously all it time. But if I press the button then nothing happens. I can’t switch it off.
Also when I drive slowly and want to activate front parking sensors I press PDC button and can't activate.
Maybe someone here can help me solve this problem
Last edited by Rmigel on 10th Feb 2012 9:37 am. Edited 1 time in total
|
10th Feb 2012 8:50 am |
|
|
Steve @ Lookers Park Royal
Member Since: 06 Oct 2011
Location: W3 0SL
Posts: 9
|
Hi Rmigel,
Normally when the light flashes on the button it means that there is a fault on the system. Could be a failure within the wiring or the PDC Sensors themselves
Hope this helps
Steve If possible please email rather than PM!
Sales - steveallum@lookers.co.uk
Service - davidkingsnorth@lookers.co.uk
Parts - andrewharding@lookers.co.uk
Tel 0208 992 2299
Please do not take any information contained within this post as factual. Always check the manufacturers web site if in doubt.
|
10th Feb 2012 9:24 am |
|
|
Rmigel
Member Since: 22 Mar 2011
Location: Saint-Petersburg
Posts: 8
|
Of course not flashing. It is certainly light continuously on the button. I have corrected in the post.
|
10th Feb 2012 9:35 am |
|
|
honza balu
Member Since: 11 Sep 2014
Location: Praha
Posts: 2
|
Hi
any solutions of the problem? i Have the same sympthoms.
Thanks
Jan
|
24th Feb 2021 1:42 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
|
I think the button is only there to turn it off. Maybe it does turn the fronts on
|
24th Feb 2021 1:51 pm |
|
|
cfcjim
Member Since: 22 Jun 2010
Location: Munich
Posts: 65
|
The forward PDC is automatically switched on when drive is selected; the rear PDC switches on automatically when reverse is selected.
The button on the dash either disables or enables depending on which state the system is in.
For example:
If the vehicle is stopped in front of a garage door and the driver wishes to disable the relevant PDC it can be switched off via the button then switched on once the door is opened and the car is entering the garage. Thus disabling and enabling.
|
25th Feb 2021 8:42 am |
|
|
honza balu
Member Since: 11 Sep 2014
Location: Praha
Posts: 2
|
thanks
I undrestand how PDC and switch works, but if i want deaktivated sensors, i touched the switch, but without any reaction. I replaced panel, but switch still doesn´t work. This problem started 2 months ago.
before, system works well
|
25th Feb 2021 9:28 am |
|
|
cfcjim
Member Since: 22 Jun 2010
Location: Munich
Posts: 65
|
Oh I see, sorry for my slightly condescending response.
I think you may have a wiring fault between the button and the PDC ECU.
|
25th Feb 2021 10:42 am |
|
|