quantumjohn
Member Since: 16 Sep 2008
Location: London
Posts: 345
|
The additional ciggy power socket in the dash has an ignition only feed wire coloured purple with a green stripe. A previous owner has plugged into this to provide the +12v accessory feed for a drop down ceiling monitor and a DVD player which have since been removed.
I am in the process of re-installing these and wanted to know if this was still a good place to take an ignition only feed from. Additional fuses will be added for each unit.
I also wanted to add a switch in the dash somewhere so that even with the ignition on I could turn the power for these off. Do I need to ensure the switch handles a certain ampage?
Thanks,
John
|
21st May 2009 12:10 am |
|
|
StuA
Member Since: 19 Apr 2009
Location: Derby
Posts: 39
|
Firstly determine to total current draw from the circuits you are connecting. Make sure the fuse in the fuse box is rated higher than this, and use this as a guide for the switch you intend to fit, although I would leave some headroom. Discovery 3 2.7 V6 TDi | Manual | S spec | Zermatt Silver | 2006 | 20% tints to rear | Audio Connectivity Module | Nokia CK-15W car kit | | Xenons | Disco 4 LED rear lights
|
21st May 2009 7:30 pm |
|
|